Radiation induced clustering affects the mechanical properties, that is the ductile to brittle transition temperature (DBTT), of reactor pressure vessel (RPV) steel of nuclear power plants. The combination of low Cu and high Ni used in some RPV welds is known to further enhance the DBTT shift during long time operation. In this study, RPV weld samples containing 0.04 at% Cu and 1.6 at% Ni were irradiated to 2.0 and 6.4×1023 n/m2 in the Halden test reactor. Atom probe tomography (APT) was applied to study clustering of Ni, Mn, Si, and Cu. As the clusters are in the nanometer-range, APT is a very suitable technique for this type of study. From APT analyses information about size distribution, number density, and composition of the clusters can be obtained. However, the quantification of these attributes is not trivial. The maximum separation method (MSM) has been used to characterize the clusters and a detailed study about the influence of the choice of MSM cluster parameters, primarily on the cluster number density, has been undertaken.

A new type of positive electrode for Li-ion batteries has been developed recently based on FeF3/C and FeF2/C nanocomposites. The microstructural and redox evolution during discharge and recharge processes was followed by electron energy loss spectroscopy (EELS) to determine the valence state of Fe by measuring the Fe L3 line energy shift and from Fe L3/L2 line intensity ratios. In addition, transition metal fluorides were found to be electron beam sensitive, and the effect of beam exposure on EELS spectra was also investigated. The EELS results indicate that for both FeF3/C and FeF2/C nanocomposite systems, a complete reduction of iron to FeO is observed upon discharge to 1.5 V with the formation of a finer FeO/LiF subnanocomposite (∼7 nm). Upon complete recharging to 4.5 V, EELS data reveal a reoxidation process to a Fe2+ state with the formation of a carbon metal fluoride nanocomposite related to the FeF2 structure.

Kelvin probe microscopy (KPM) is a specialized atomic force microscopy technique in which long-range Coulomb forces between a conductive atomic force probe and a specimen enable the electrical potential at the surface of a specimen to be characterized with high spatial resolution. KPM has been used to characterize nonconductive materials following their exposure to stationary electron beam irradiation in a scanning electron microscope (SEM). Charged beam irradiation of poorly conducting materials results in the trapping of charge at either preexisting or irradiation-induced defects. The reproducible characteristic surface potentials associated with the trapped charge have been mapped using KPM. Potential profiles are calculated and compared with observed potential profiles giving insight into the charging processes and residual trapped charge distributions.