The pH of spray mixtures is an important attribute that affects dicamba volatility under field conditions. This report examined the effect of different components added to water sources that ranged in initial pH from 4.6 to 8.4. Commercial products were used, which include formulations of dicamba, glyphosate, the drift retardant Intact, ammonium sulfate (AMS), and several pH modifiers. Adding BAPMA salt of dicamba always increased the mixture pH, whereas diglycolamine + VaporGrip® (DGA+VG) had a mixed response. The addition of AMS decreased pH slightly (usually <0.5 pH unit), whereas the addition of potassium salt of glyphosate (GLY-K) always decreased the measured pH (from 1.0 to 2.1 pH units). A substantial pH change could have profound effects on dicamba volatility. Moreover, the 1.0 to 2.1 pH units would not be consistent with the registrant’s report stating that GLY-K decreased mixtures with DGA+VG pH by only 0.2 to 0.3 units. The drift retardant Intact had no effect on pH. There was no difference in resultant pH when comparing K salt and isopropylamine (IPA) salts of glyphosate. Spray carrier volume, ranging from 94 to 187 L ha–1, had only a minor effect on measured pH after the addition of various spray components. The addition of selected pH modifiers raised the pH above 5.0, which is a critical value according to the latest dicamba application labels. The order of mixing of various pH modifiers, including AMS, had only limited effect on measured spray solution pH.

This research examined dicamba measurements following an application to soil inside a humidome. The dicamba formulations examined were the diglycolamine (DGA) and diglycolamine plus VaporGrip® (DGA+VG), both applied with glyphosate. Post-application dicamba measurements were related to ambient temperature, with more dicamba detected as the temperature increased. There also appeared to be a minimum temperature of ~15 C at which dicamba decreased to low levels. The addition of glyphosate to dicamba formulations decreased the spray mixture pH and increased the observed dicamba air concentrations. Adding glyphosate to DGA+VG increased detectable dicamba air concentrations by 2.9 to 9.3 times across the temperature ranges examined. Particle drift would not be expected to be a factor in the research, as applications were made remotely before treated soil was transported into the greenhouse. The most probable reason for the increased detection of dicamba at higher temperatures and with mixtures of glyphosate is via volatility.