Florpyrauxifen-benzyl has generated complaints and concerns around rice injury and off-target movement to soybean since its commercial launch in 2018. Developing a precise method for applying florpyrauxifen-benzyl was imperative for its continued use. Experiments were conducted in 2020 and 2021 to evaluate rice weed control as influenced by preflood application interval and flood loss following florpyrauxifen-benzyl at 30 g ai ha−1 applied as a spray or coated on urea. In a preflood application experiment, coating florpyrauxifen-benzyl on urea and applying it the day of flood establishment and 5 and 10 d prior to flooding (DPTF) resulted in lower yellow nutsedge, broadleaf signalgrass, and barnyardgrass control than when the herbicide was spray at 3 and 5 wk after final treatment (WAFT). Coating florpyrauxifen-benzyl onto urea provided only 61% to 63% yellow nutsedge control at 3 and 5 WAFT, which was 35 to 37 percentage points lower than when the spray was applied at 5 or 10 DPTF. Likewise, rice yields following applications of florpyrauxifen-benzyl coated onto urea were 1,200 kg ha−1 less than yields following spray applications. Florpyrauxifen-benzyl coated onto urea and clomazone provided lower levels of weed control than spraying the herbicide alone, suggesting an explanation for the yield losses. The timing of flood loss experiment suggested that when florpyrauxifen-benzyl coated onto urea at 30 g ai ha−1 was applied preflood and flood was relinquished at 2 h, 24 h, and 7 d after flood establishment, hemp sesbania and yellow nutsedge control were not affected. However, loss of floodwater 2 h after flood establishment resulted in lower barnyardgrass control than when the flood was lost 24 h and 7 d after flooding. Generally, the period between a herbicide application and flooding completion should be minimized to aid in weed control. These results indicate the importance of maintaining a flood for weed control and nutrient management.

In 2021 and 2022, research was initiated at two locations to evaluate the efficacy and safety of sulfentrazone in transplanted cabbage and broccoli. Treatments included oxyfluorfen at 560 g ha−1 applied pretransplant (PRE-T), sulfentrazone applied at 116 or 233 g ha−1 PRE-T, and S-metolachlor applied at 715 g ha−1 immediately after transplanting (POST-T) followed by (fb) oxyfluorfen applied at 210 g ha−1 postemergence (POST) 14 d after planting (DAP). The weedy cover of nontreated plots averaged between 6% (14 DAP) and 72% (42 DAP); all herbicide-treated plots averaged less than 30% cover at 42 DAP. At 14 and 28 DAP, oxyfluorfen, S–metolachlor fb oxyfluorfen, and the high rate of sulfentrazone reduced total monocotyledonous and dicotyledonous weed densities by 62% and 100%, respectively, relative to the nontreated control. The density of hairy galinsoga (in New Jersey) and combined ladysthumb and prostrate knotweed (in New York) were reduced by 71% to 99%. Except for the low rate of sulfentrazone, all herbicide treatments reduced weed biomass at harvest by ≥88%. Crop injury varied in response to herbicide treatments or weed competition but was also affected by crop and location. Between 14 and 28 DAP, the greatest amount of stunting (22%) was noted in the S-metolachlor fb oxyfluorfen treatments at both locations. Averaged over treatments, greater stunting was observed in broccoli than in cabbage in New York, whereas stunting estimates were higher for cabbage in New Jersey. All treatments in New Jersey resulted in significantly increased cabbage yield and broccoli and cabbage head sizes relative to the nontreated controls. No yield difference was noted between herbicide treatments and the nontreated check in New York. Data derived from these studies will be used to enhance crop safety recommendations in northeastern U.S. production environments for sulfentrazone used PRE in transplanted cabbage and support a potential label for broccoli.

Conservation tillage adoption continues to be threatened by glyphosate and acetolactate synthase–resistant Palmer amaranth and other troublesome weeds. Field experiments were conducted from autumn 2010 through crop harvest in 2013 at two locations in Alabama to evaluate the effect of integrated management practices on weed control and seed cotton yield in glyphosate-resistant cotton. The effects of a cereal rye cover crop using high- or low-biomass residue, followed by wide or narrow within-row strip tillage and three PRE herbicide regimens were evaluated. The three PRE regimens were (1) pendimethalin at 0.84 kg ae ha−1 plus fomesafen at 0.28 kg ai ha−1 applied broadcast, (2) pendimethalin plus fomesafen applied banded on the row, or (3) no PRE. Each PRE treatment was followed by (fb) glyphosate (1.12 kg ae ha−1) applied POST fb layby applications of diuron (1.12 kg ai ha−1) plus monosodium methanearsonate (2.24 kg ai ha−1). Low-residue plots ranged in biomass from 85 to 464 kg ha−1, and high-biomass residue plots ranged from 3,119 to 6,929 kg ha−1. In most comparisons, surface disturbance width, residue amount, and soil-applied herbicide placement did not influence within-row weed control; however, broadcast PRE resulted in increased carpetweed, large crabgrass, Palmer amaranth, tall morning-glory, and yellow nutsedge weed control in row middles compared with plots receiving banded PRE. In addition, high-residue plots had increased carpetweed, common purslane, large crabgrass, Palmer amaranth, sicklepod, and tall morning-glory weed control between rows. Use of banded PRE herbicides resulted in equivalent yield and revenue in four of six comparisons compared with those with broadcast PRE herbicide application; however, this would likely result in many between-row weed escapes. Thus, conservation tillage cotton would benefit from broadcast soil-applied herbicide applications regardless of residue amount and tillage width when infested with Palmer amaranth and other troublesome weed species.

Yellow nutsedge (Cyperus esculentus L. # CYPES) was treated with unlabeled and 14C-labeled glyphosate [N-(phosphonomethyl)glycine] to study the toxicity and translocation of glyphosate into parent tubers of this weed. When plants of 2 and 4 weeks of age were treated with 0.6 kg ai/ha of glyphosate, fewer parent tubers from treated plants resprouted (14 and 32%) than tubers from control plants (73 and 59%, respectively) of equal age. Also, fewer tubers resprouted from 2-week than from 4-week-old treated plants. The radioactivity of parent tubers from plants treated at 2 weeks of age, which exceeded that of tubers from plants of 4 and 6 weeks of age, indicated that translocation of 14C into parent tubers decreased as the treated plants increased in age. The differential amounts of 14C translocated appear to explain why applications of glyphosate were more effective in suppressing resprouting of parent tubers from 2-week than 4-week-old plants.

Herbicides were evaluated alone, in combinations, or as sequential treatments on direct-seeded tomato each year from 1982 through 1984. Diphenamid at 4.5 kg ai/ha or napropamide at 1.1 to 2.2 kg ai/ha alone are registered but frequently do not control weeds adequately, particularly when yellow nutsedge and/or Florida pusley is common. Combinations or sequential treatments are necessary to overcome these weed problems in cropping systems. Metolachlor at 0.8 to 3.4 kg ai/ha injured direct-seeded tomato in proportion to the rate applied. Pendimethalin at 0.6 kg ai/ha also injured tomatoes. Fluazifop at 0.3 to 0.6 kg ae/ha and sethoxydim at 0.2 to 0.5 kg ai/ha effectively controlled annual grasses without injuring tomato seedlings. These herbicides would reduce competition and would increase harvesting efficiency where grass weeds are a problem.

Field studies were conducted from 1995 to 1997 near Tifton, GA, to determine the benefits of stale seedbed weed control in cucumber. Three stale seedbed management systems—(1) power till stale seedbeds twice (2 ×), (2) glyphosate application immediately after planting, and (3) combination system of stale seedbeds power tilled once 2 wk prior to planting followed by glyphosate application immediately after planting cucumber—were evaluated as main plots. Subplots were weed management systems after planting cucumber: intensive, basic, and cultivation alone. Weed densities were generally greater in 1996 and 1997 than in 1995. Yellow nutsedge was the overall predominant species in 1995 (46 plants m−2), with Florida pusley being the predominant species in 1996 and 1997, at 80 and 124 plants m−2, respectively. Generally, stale seedbeds shallow tilled 2 × had fewer weeds and greater cucumber yields than stale seedbeds treated with glyphosate. Glyphosate did not adequately control emerged Florida pusley on stale seedbeds, resulting in reduced cucumber yield. Clomazone preemergence and bentazon/halosulfuron postemergence were used for broadleaf weed control in the intensive weed management system. These herbicides injured cucumber plants, delayed maturity, and reduced yield. Based on our results, stale seedbeds shallow tilled 2 × can be integrated into cucumber production and provide effective cultural weed control. Furthermore, these systems will replace the need for potentially injurious herbicides.

Experiments were conducted from 1988 through 1991 to evaluate the effectiveness of imazethapyr alone and in combination with metolachlor for control of yellow and purple nutsedge. Imazethapyr alone at 0.07 kg ha–1 controlled yellow nutsedge irregularly while the addition of metolachlor greatly improved control. Metolachlor preplant incorporated (PPI) followed by imazethapyr at ground-crack (GC) or postemergence (POST) controlled 72 to 96% of yellow nutsedge, whereas a tank-mix of metolachlor plus imazethapyr PPI controlled 85 to 96%. The addition of metolachlor to imazethapyr did not result in any improvement in control of purple nutsedge. Metolachlor plus imazethapyr PPI controlled ≥ 85% of purple nutsedge PPI, whereas imazethapyr POST controlled ≥ 94%.

The allelopathic influence of sweet potato cultivar ‘Regal’ on purple nutsedge was compared to the influence on yellow nutsedge under controlled conditions. Purple nutsedge shoot dry weight, total shoot length and tuber numbers were significantly lower than the controls (47, 36, and 19% inhibition, respectively). The influence on the same parameters for yellow nutsedge (35, 21, and 43% inhibition, respectively) were not significantly different from purple nutsedge. Sweet potato shoot dry weight was inhibited by purple and yellow nutsedge by 42% and 45%, respectively. The major allelopathic substance from ‘Regal’ root periderm tissue was isolated and tested in vitro on the two sedges. The I50's for shoot growth, root number, and root length were 118, 62, and 44 μg/ml, respectively, for yellow nutsedge. The I50's for root number and root length were 91 and 85 μg/ml, respectively, for purple nutsedge and the I50 for shoot growth could not be calculated.

Soil solarization has been proposed as an alternative to methyl bromide for controlling nutsedges. Little is known, however, about the relationship between soil solarization and nutsedge tuber viability. Combinations of elevated temperatures and durations of exposure were evaluated for their effect on purple nutsedge and yellow nutsedge tuber viability and new tuber production in growth chamber studies. Estimates of the duration of exposure at each temperature that reduced nutsedge growth parameters 50% (TT50) were supplied by log-logistic regression analysis. Nutsedge tuber viability was reduced when temperatures were ≥ 45 C. Relative to purple nutsedge, yellow nutsedge tuber viability had smaller TT50 values for 45, 50, and 55 C. Tuber viability TT50 at 60 C was similar for both nutsedges. The TT50 for production of new purple nutsedge tubers at 50 C was larger than that for yellow nutsedge. However, there were no differences between species in TT50 values for new tuber production at higher temperatures. With sufficient durations of exposure, both purple and yellow nutsedge tubers were killed at temperatures ≥ 50 C. However, application of these data to field situations in Georgia may be limited using present technology because the soil temperature cannot be raised to high enough levels for acceptable solarization effects.

Methyl bromide (MBr) was widely used as a soil fumigant to manage pests in the planting bed prior to transplanting fresh market tomato; however, it has been banned by the United Nations Environment Programme. Alternatives to MBr must be implemented to sustain productivity in fresh market tomato. Dimethyl disulfide plus chloropicrin (DMDS : Pic) is a fumigant alternative to methyl bromide for the management of yellow nutsedge and other soil-borne pests in tomato. Fumigant costs, environmental concerns, and risk mitigation measures encourage reduced fumigant application rates. Virtually impermeable film (VIF) and totally impermeable film (TIF) provide greater fumigant retention than low density and high density polyethylene film, VIF and TIF can allow for reduced fumigant application rates while maintaining fumigant efficacy. The objectives of this research were to evaluate TIF with reduced rates of shank-applied DMDS : Pic (79 : 21 w/w) for the control of yellow nutsedge in tomato. Treatments included a standard rate of DMDS : Pic (468 L ha−1) under VIF and TIF, a high rate (561 L ha−1) under VIF, three reduced rates (187 L ha−1, 281 L ha−1, and 374 L ha−1) under TIF, and a nontreated control under TIF and VIF. Results indicated rates may be reduced from a standard 468 L ha−1 under VIF to 187 L ha−1 (67% reduction) under TIF while maintaining yellow nutsedge control and tomato yields. In addition, the results indicated that nontreated TIF managed yellow nutsedge better than nontreated VIF because of decreased penetration of the mulch by yellow nutsedge.

Field studies were conducted near Oxnard, CA and in two locations near Salinas, CA in 2002 and 2003 to evaluate efficacy and safety of six herbicides in celery. s-metolachlor at 0.6 and 0.7 kg ai/ha and flufenacet at 0.5, 0.6, and 0.7 kg ai/ha PRE were safe to celery and controlled 81 to 94% of yellow nutsedge at densities < 20 plants/m2. At yellow nutsedge densities > 20 plants/m2, the most efficacious treatments were 1.1 kg/ha of s-metolachlor or 0.7 kg/ha of flufenacet, which reduced nutsedge densities by 71 or 53%, respectively; however, both resulted in slight injury to celery. All other herbicides generally did not injure celery and none reduced marketable crop yield. Flumioxazin pretransplant (PRE) at 0.1 and 0.2 kg ai/ha controlled broadleaf weeds near 100% at all locations, suggesting that it can be an effective alternative to standard linuron and prometryn, which are applied post-transplant (POST) in celery.

Experiments were conducted during 2000 and 2001 at a total of 13 locations throughout Alabama, Georgia, Florida, North Carolina, and Texas to evaluate efficacy of herbicides at or below the manufacturer's suggested use rate. Herbicide applications included diclosulam and flumioxazin applied PRE alone or followed by imazapic applied early postemergence (EPOST). All possible combinations of diclosulam at 0, 13.5, or 27 g ai/ha and flumioxazin at 0, 53, or 105 g ai/ha applied PRE were included. Imazapic was applied at 35 g ai/ha. Ivyleaf morningglory was controlled more than 87% when imazapic was applied EPOST regardless of PRE herbicide. Pitted morningglory control > 67% was observed with applications of diclosulam (27 g/ha) followed by imazapic, diclosulam (13.5 g/ha) plus flumioxazin (53 g/ha), diclosulam (13.5 g/ha) plus flumioxazin (105 g/ha), and diclosulam (27 g/ha) plus flumioxazin (105 g/ha). Sicklepod was controlled more than 74% with flumioxazin (53 g/ha) followed by imazapic and diclosulam (27 g/ha) plus flumioxazin (105 g/ha) followed by imazapic. Florida beggarweed was controlled more than 84% by all PRE herbicide combinations except flumioxazin (53 g/ha) alone or diclosulam (27 g/ha) alone or with imazapic. Yellow nutsedge was controlled at least 90% with diclosulam at either rate followed by imazapic and by diclosulam plus flumioxazin followed by imazapic regardless of rate. Pod yield was generally higher when herbicides were applied regardless of herbicide combination or rate. Peanut yield was maximized with the lowest rates of flumioxazin or diclosulam PRE followed by imazapic EPOST.

Greenhouse studies were conducted to evaluate halosulfuron tolerance of several squash and cucumber cultivars commonly grown in Georgia. There was an inverse linear relationship between squash plant biomass and rate of halosulfuron (r 2 = 0.70 to 0.92). With the exception of ‘Supersett’, the slopes from regression of all squash cultivars were equivalent. The estimated amount of halosulfuron required to reduce growth by 20%, based on regression, ranged from 8.2 to 45 g ai/ha (for Supersett and ‘Dixie’, respectively). Squash plant height was also reduced by halosulfuron, though plants began to recover from the injury by the end of the study. There was no effect of halosulfuron rate on cucumber plant biomass or height. Cucumber cultivars appeared to be more tolerant to halosulfuron than did squash cultivars.

Methyl bromide (MeBr), classified as a Class I ozone-depleting substance, has been banned for ordinary agricultural uses. Weed control in commercial bell pepper production is complicated by the ban on MeBr and the lack of other available and effective soil fumigants. A field study was conducted to evaluate the effectiveness of allyl isothiocyanate (ITC) and metam sodium (methyl ITC generator) as MeBr alternatives for control of Palmer amaranth, large crabgrass, and yellow nutsedge; and for increasing marketable yields in low-density polyethylene (LDPE) –mulched bell pepper. Allyl ITC was applied at 450, 600, and 750 kg ha−1; metam sodium was applied at 180, 270, and 360 kg ha−1; and MeBr plus chloropicrin (67% and 33%, respectively) was applied at 390 kg ha−1. Allyl ITC and metam sodium did not injure bell pepper. Allyl ITC at 750 kg ha−1 or metam sodium at 360 kg ha−1 controlled Palmer amaranth (≥ 83%), large crabgrass (≥ 78%), and yellow nutsedge (≥ 80%) comparably to MeBr. Yellow nutsedge tuber density was ≤ 84 tubers m−2 in plots treated with the highest rate of allyl ITC and metam sodium and was comparable to the tuber density in MeBr-treated plots. Although allyl ITC at 750 kg ha−1 controlled weeds comparable to MeBr, total marketable bell pepper yield with allyl ITC was lower than the yield with MeBr. Conversely, total marketable bell pepper yield with the highest rate of metam sodium (53.5 ton ha−1) was equivalent to the yield (62.5 ton ha−1) in plots treated with MeBr. In conclusion, metam sodium at 360 kg ha−1 is an effective MeBr alternative for weed control in LDPE–mulched bell pepper.