Climbing robots have broad application prospects in aerospace equipment inspection, forest farm monitoring, and pipeline maintenance. Different types of climbing robots in existing research have different advantages. However, the self-adaptability and stability have not been achieved at the same time. In order to realize the self-adaptability of holding and climbing stability, this work proposes a new type of climbing robot under the premise of minimizing the driving source. The robot realizes stable multifinger holding and wheeled movement through two motors. At the same time, the robot has two different working modes, namely pole climbing and ground crawling. The holding adaptability and climbing stability are realized by underactuated holding mechanism and model reference adaptive controller (MRAC). On the basis of model design and parameter analysis, a prototype of the climbing robot is built. Experiments prove that the proposed climbing robot has the ability to stably climb poles of different shapes. The holding and climbing stability, self-adaptability, and climbing and crawling speed of the proposed climbing robot are verified by experiments.

In the present paper, a model of an underactuated robotic hand with tendon driven fingers is proposed. The aim of the project was to study the feasibility of building a mechanical hand with four or five fingers, the movement of which is achieved using a single linear actuator. The mechanism was first modelled in order to study the possible improvement in the ability of a “robotic hand” powered with a single actuator in regard to grasping objects with complex shapes and also in achieving a strong grip on objects. Next, a model of the finger was studied in order to optimize of its parameters. Finally, a five-fingered robotic hand was modelled for potential application as a human hand prosthesis. Our studies on the dynamic and kinematic behaviour of a single finger mechanism permitted us to make the first prototypes of the mechanism. In addition to modelling studies, we also present a prototype of the modelled robotic hand that was developed in order to optimize functionality and simplicity of construction.