An E-band Cassegrain switched beam high-gain antenna concept for 5G backhauling systems is proposed in this article. The antenna requirements target the compensation of small misalignments (within ±1 degrees in both azimuth and elevation planes) in E-band backhauling links due to adverse weather conditions or thermal deformations. The intended antenna is able to realize beam-switching operations by using a feed-array architecture based on a 7 × 7 array of cavity-backed magnetoelectric (ME) dipoles, where every element is capable of providing a steering of ±0.33 degrees in both the elevation and the azimuth planes. The ME dipole illuminators combined with a Cassegrain reflector provide a gain of 52 dBi within the whole scanning range. Besides, they can be easily integrable with the front-end modules, thus being an easily implementable and low-cost alternative to other more complex solutions based on horns or lens antennas.

This paper considers the ability of polarization measurements for microwave remote sensing of clouds and precipitation. The simulation of reflections from liquid hydrometeors with a multi-polarization radar system is presented. The mathematical expression of energy received by a radar antenna with arbitrary polarization is obtained. The simulation of the energy redistribution of the signal reflected from liquid hydrometeors assembled over the antennas of multi-polarimetric radar for different wind conditions and different drop-size distributions is obtained and analyzed. The simulation results demonstrate the possibility to register wind and wind-related phenomena by polarimetric radar. The results of the paper can also be used to exclude an impact of drop vibration or oscillation into the radar signal to eliminate errors and underestimation during parameter measurements. The approach to segregate the reflected signal magnitude variations due to the wind-related phenomena from other factors is discussed.

Nowadays, as indoor localization is getting more popular, there is a growing need for reliable and accurate techniques of position determination. Recently, ultrawideband (UWB)-based systems are gaining popularity, since they make achieving positioning errors in the range of dozens of centimeters or even single centimeters, possible. The Time Difference of Arrival (TDOA)-based systems are especially attractive because they allow to simplify tags, in which functionality can be limited to transmission of packets. However, one of TDOA-based solution drawbacks is a need for strict synchronization between anchor nodes, which may be hard to provide in indoor environment. In the paper, a novel method for simplifying synchronization in TDOA-based UWB localization system is described. The paper presents two system architectures based on pairs of synchronized nodes. Results of simulations and experiments included in the article allow for evaluation of both solutions.

A microwave design for an industrial scale applicator of a continuous microwave assisted depolymerization of polyethylene terephthalate (PET) has been developed. The cavity is designed for use in combination with an Archimedean screw pump to transport the reaction material, surrounded by a cylindrical pipe with a diameter of 250 mm and a length of 250 mm at the 2.45 GHz ISM band. The proposed design is modular and can be easily expanded for the heating of longer reactor tubes. Simulation results show that a homogeneous heating of the process material along the screw axis can be achieved by using a novel cavity design which is based on the TE1,0,x– rectangular waveguide cavity mode. The achieved design provides high energy efficiency with a reflected power of less than 10%. It is robust against changes in the permittivity of the reactants. The electromagnetic design is based on the dielectric properties of the solvolytic reaction mixture measured in the relevant temperature range. It is verified over the full range of the expected permittivities.

We present a method for detecting parking spaces in radar images based on convolutional neural networks (CNN). A multiple-input multiple-output radar is used to render a slant-range image of the parking scenario and a background estimation technique is applied to reduce the impact of dynamic interference from the surroundings by separating the static background from moving objects in the scene. A CNN architecture, that also incorporates mechanisms to generalize the model to new scenarios, is proposed to determine the occupancy of the parking spaces in the static radar images. The experimental results show very high accuracy even in scenarios where little or no training data is available, proving the viability of the proposed approach for its implementation at large scale with reduced deployment efforts.

A compact printed quadrant shaped monopole antenna is introduced in this paper as a good prospect for ultra wideband- multiple-input multiple-output (UWB-MIMO) system. The proposed MIMO antenna comprises two perpendicularly oriented monopoles to employ polarization diversity. An open circuit folded stub is extended from the ground plane of each radiating element to enhance the impedance bandwidth satisfying the UWB criteria. Two ‘L’ shaped slots are further etched on the radiator to provide good isolation performance between two radiators. The desirable radiator performances and diversity performances are ensured by simulation and/or measurement of the reflection coefficient, radiation pattern, realized peak gain, envelope correlation coefficient (ECC), diversity gain, mean effective gain (MEG) ratio and channel capacity loss (CCL). Results indicate that the proposed antenna exhibits 2.9–11 GHz 10 dB return loss bandwidth, mutual coupling <−20 dB, ECC < 0.003, MEG ratio ≈ 1, and CCL < 0.038 Bpsec/Hz, making it a good candidate for UWB and MIMO diversity application.

A tunable radiator for space application has been developed to meet stringent requirements in terms of electrical and environmental specifications but also low mass, simple manufacturing and low cost. The element is based on the folded planar inverted F-antenna, with size of one quarter of wavelength. It is mechanically tunable to adjust input impedance for any various positions on the satellite body and possible obstacles and protrusions. Results in terms of radiation pattern, S parameters, shock and vibration tests are presented. The antenna operates in ultra-high frequency band (400 MHz) in linear polarization. It has been designed to act as the basic element for miniaturized multi-function antenna systems on board of small satellites that can operate in three different radiating modes and in both left and right hand circular polarizations.