This article presents the design of a novel sigma slotted circular monopole antenna for wireless body area network applications. The design is proceeded with a sigma-shaped slot etched on the circular radiator with Rogers 4003C substrate. The size of the proposed antenna is 30 × 30 × 1 mm3. With partial ground plane, the bandwidth characteristics of the antenna have been enhanced. The designed antenna covers 2–10 GHz of the ultra wideband, thereby providing more than 106% bandwidth. The antenna exhibits high gain values of 1.95, 3.23, 3.46, and 5.95 dB at 2.45, 3.45, 5.8, and 9.5 GHz, respectively. The proposed design operates on off-body mode at 2.45 GHz and on-body mode at 5.8 GHz, thus acting as a dual-mode antenna. To ensure the health and safety measure, specific absorption rate analysis was done for both low and high values of input power and also with Cartesian and cylindrical human arm models. Bending analysis was also done. The time domain parameter group delay was also analyzed for the proposed antenna for on- and off-body scenarios. The prototype was fabricated, and validation of simulation results was done for free space and on-body scenarios.

This paper distinguishes the design and analysis of 3 × 2 circular microstrip patch probe array for specific absorption rate (SAR) measurement at quad-band. This novel approach consists of FR4 substrate radial dimension of 88 mm and it has six circular array elements with a radius of 17 mm; out of these six elements, three array elements are having rectangular slots with dimensions of 1.8 × 1.5 × 1.5 mm3. The array elements are coupled with six probes which have a dimension of 100 mm with a 2.5 mm tip radius; these six probes are embedded into a tissue-equivalent liquid-filled human head mannequin. In this mannequin, instantaneous SAR at any six positions has been investigated. The proposed design resonates at 1.8, 2.1, 2.4, and 2.5 GHz with a return loss of −11.53, −15.90, −15.73, and −25.49 dB. The circular microstrip probe array is fed by a 50 Ohm coaxial feed. In addition, the 3D human head model analysis is also presented. The precisely estimated SAR values are 0.135, 0.108, 0.167, and 0.244 W/kg at 1 g of tissue. For the traceable measurements, each source of uncertainty budget has been estimated.

In this article, a meander line-shaped pentaband (2.18–2.24, 2.38–2.46, 2.65–2.70, 3.10–3.32, 3.38–3.46 GHz) four-element multiple-input–multiple-output antenna is presented. The proposed antenna is also circularly polarized in two bands (at 2.2 and 2.4 GHz) with dual-polarization like right-handed at port 1 or 3 and left-handed at port 2 or 4, which is widely used for mobile satellite services (MSS) and Internet of Things applications. This antenna is designed and fabricated with compact size 50 × 70 × 1.6 mm3 on the FR-4 substrate with good diversity performance in pentaband. Simulated results of antenna-like return loss, isolation, and parameters-related diversity have also been tested experimentally in a controlled environment, which is within the permissible limit. The designed antenna will be appropriate for MSS, industrial scientific and medical (ISM), broadband radio services and educational broadband services, WiMAX radio location services, and amateur radio services. Meanwhile, specific absorption rate of the designed antenna has been examined in an empirical environment for the Fresnel radiating near-field applications.

The artificial magnetic conductor (AMC) formed by meta-materials is used in the micro-strip antenna design for microwave sensor applications. The AMC structures with two uniplanar layers, which include modified square split-ring resonator cells, are repeated and formed into a 5 × 3 array. The antenna's operational bandwidth result is significant, and it is in the range of 2.8–10 GHz with a maximum gain of 11.8 dB. Cancer or malignant tumor cells have entirely different electrical properties than healthy breast tissue. Principal component analysis and specific absorption rate (SAR) are used as a parameter to identify cancer or malignant tumor cells in the breast. The SAR values have been calculated for each layer of the 3D breast model. The results show a difference in the SAR values based on the size and tumors' locations.

The design, simulations, and optimized results for a novel low specific absorption rate (SAR) monopole antenna on a single artificial magnetic conductor (AMC) cell are described in this paper. Simulated results show a reduction close to 70% in the 1 g ps SAR for the developed monopole antenna with the AMC in comparison to the monopole antenna without AMC. This allows higher radiation efficiency, battery drain reduction as well as mobile terminal user health risks reduction.

The goal of this study is to analyze the specific absorption rate (SAR) distribution of the projected 5G frequencies below 6 GHz and at Wi-Fi frequency (2.45 GHz) on a human head, for eyewear device applications. Two separate tri-band printed dipole antennas for this purpose are designed and fabricated at operating frequencies of 2.45/3.8/6 GHz for prototype-1 and at operating frequencies of 2.45/3.6/4.56 GHz for prototype-2. In order to obtain the desired frequencies: first, the prototypes of the proposed antennas are fine-tuned via Computer Simulation Technology Microwave Studio (CST) and then fabricated on the FR4 layer. The reflection coefficient (S11) is tested and the simulation results are confirmed. In order to analyze the effect of wearing a pair of glasses' frame including a tri-band 5G antenna, a frame is designed and produced via 3D printer with polylactic acid material which has high dielectric constant (ɛr = 8.1). The SAR results of the proposed antennas have been examined for the cases where the antenna is embedded in the frame and is used alone. Both cases were analyzed by using the homogeneous specific anthropomorphic mannequin and the heterogeneous visible human head phantoms and the results have been evaluated in terms of SAR10 g values.

Microwave imaging is an efficient technique that can be used for the early detection of breast cancer. Therefore the current research article presents the microwave imaging of two spherical tumors (radius 4 and 5 mm) in the breast phantom by using the monostatic radar-based technique. This is carried out by using an ultra-wideband (4.9–10.9 GHz), three-layered stacked aperture coupled microstrip antenna (SACMPA) with a defected ground structure to scan the breast phantom and make near field S parameter measurements from a breast phantom. The S parameter data from different locations and at different time intervals are noted and then used in a beam-forming algorithm; Delay and Sum to process it and form a 2D image of the tumor location in the breast phantom using MATLAB.

The proposed SACMPA is a three-layered structure with overall dimensions of 37 × 43 × 4.85 mm3 that shows an impedance bandwidth of 6 GHz (4.9–10.9 GHz) and a simulated peak gain of 6.32 dB at a frequency of 9.1 GHz. The validation of S parameters and gain results are done using a Vector Network Analyzer (VNA) and an anechoic chamber. The experimental validation of the proposed microwave imaging procedure is done by allowing the SACMPA to radiate parallel to the breast phantom made from polythene (skin), petroleum jelly (fat), and wheat flour (with water as tumor) and record the S parameters on the VNA. The proposed microwave method is safe for human exposure as the antenna also shows simulated specific absorption rates of 0.271 and 1.115 W/Kg (on the breast phantom) at frequencies of 5.7 and 6.5 GHz, respectively (for 1 g of body tissue).

In this work, simple, low profile, compact quarter-mode substrate-integrated waveguide (QMSIW)-based antennas are proposed for Wireless Local Area Network (WLAN) at 5.2/5.5 GHz and Wireless Body Area Network (WBAN) at 5.8 GHz, respectively. By implementing QMSIW technique, the electrical size of the antenna is reduced up to 1/4th of the conventional circular SIW cavities. Thanks to the quarter mode concept, the antenna size is reduced significantly by preserving its dominant mode. The resonant frequency of the dominant mode TM010 is independently tuned at 5.2, 5.5, and 5.8 GHz after loading the QMSIW cavity with metalized via holes, subsequently. The on-body performance of the antenna is verified on pork tissues at 5.8 GHz and it is found to be insensitive with respect to surroundings. The measured gain and simulated efficiency of the proposed antenna at 5.8 GHz in free space are 4.8 dBi and 92%, while in the proximity of pork tissues values are 3.25 dBi and 57%, respectively. Moreover, the measurement results demonstrate a good matching with the simulation results.

In this paper, a novel low-profile planar monopole internal antenna for GSM/DCS/PCS/ IMT/UMTS/WLAN/ISM/LTE operation in the mobile phones is designed and developed. The proposed antenna is composed of multi-branches, F-shaped slots in the system ground plane and tapered feeding line which can improve the impedance matching at the feeding point. The antenna occupying a small area of 18.5 × 46 mm2 is placed on the top no-ground portion of the system circuit board, which makes it suitable for practical mobile applications. A prototype of the proposed antenna is fabricated and tested. In addition, the planar monopole antenna can provide two wide lower and upper bands to respectively cover the frequency range of 848–1152 MHz, and 1736–3000 MHz, for the GSM850/GSM900/DCS1800/PCS1900/IMT2000/UMTS2100/WLAN2400/ISM2450/LTE2300/LTE2500 operation in the mobile phone. Good radiation patterns and antenna peak gain for frequencies over the operating bands have been observed. The antenna is simulated and designed by using Ansoft HFSS and CST Microwave Studio. Details of the antenna design, results on the reflection coefficient, radiation characteristics, directivity, antenna gain, realized gain, and efficiency of the antenna are given and discussed. Finally, the specific absorption rate (SAR) of the proposed antenna placed at the bottom of the mobile phone is also investigated. The obtained SAR values meet the limit of 1.6 W/kg for the 1 g head tissue and 2.0 W/kg for the 10 g head tissue.

In this paper, theoretical/simulation study of specific absorption rate (SAR) and/or temperature distributions in a bi-layered bio-media (fat and muscle)/realistic tri-layered bio-media (skin, fat, and muscle layers) in direct contact with water-loaded metal diagonal horn (MDH) designed at 915 MHz are investigated. The effects of fat thickness on the input reflection coefficient, reflection coefficient at the interface between the MDH and the bi-layered bio-media, and the SAR distribution in the bi-layered bio-media are also studied through simulation and theoretically at 915 MHz. Further, the SAR parameters such as penetration depth and effective field size inside the bi-layered bio-media due to the MDH are evaluated theoretically and the theoretical results are compared with the corresponding simulation results. Finally, SAR and temperature distributions in tri-layered bio-media without and with embedded irregular/oval-shaped tumor are provided for demonstrating the hyperthermia performance of the MDH applicator.