A three-section pulse forming network (PFN) based on Guillemin type-C circuit was developed to meet the challenge of a compact design, high withstand voltage, and high-quality output waveform with fast rise time, flat-top duration, and 100-ns pulse width. A simplified pulse forming circuit was proposed and studied that includes only three LC-sections connected in parallel, with each section containing an inductor and a capacitor connected in series. The effect of the capacitance deviation on the output waveform was investigated. The simulation results show that when the capacitance deviation exceeds +3%, both the flat top and fall time of the output waveform of single PFN module deteriorate greatly. Fortunately, in a multi-stage PFN-Marx circuit, even if the capacitance deviation exceeds +10%, when the average capacitance of the same LC sections is close to the theoretical value, the output waveform maintains a good quality and is in good agreement with the theoretical prediction. The compact three-section PFN developed during this project has a size of only 360 mm × 342 mm × 65 mm, and a maximum withstand voltage of 120 kV. Sixteen PFN stages were assembled to form a Marx generator with design parameters to provide of an output peak power of 12 GW and a maximum peak current of 15 kA. The tested output waveform agrees well with the theoretical results, having a rise time of 31 ns, a flat-top of 104 ns, and a pulse with of 164 ns.

This paper introduces recent activities on Marx-based compact repetitive pulsed power generators at the Institute of Applied Electronics (IAE), China Academy of Engineering Physics (CAEP), over the period 2010–2018. A characteristic feature of the generators described is the use of a simplified bipolar charged Marx circuit, in which the normal isolation resistors or inductors to ground are removed to make the circuit simpler. Several pulse-forming modules developed to generate a 100 ns square wave output are introduced, including thin-film dielectric lines of different structures, a pulse-forming line based on a Printed Circuit Board, and non-uniform pulse-forming networks. A compact repetitive three-electrode spark gap switch with low-jitter, high-voltage, and high-current was developed and is used in the generators. A positive and negative series resonant constant current power supply with high precision and high power is introduced. As an important part of the repetitive pulse power generator, a lower jitter pulse trigger source is introduced. Several typical high-power repetitive pulsed power generators developed at IAE are introduced including a 30 GW low-impedance Marx generator, a compact square-wave pulse generator based on Kapton-film dielectric Blumlein line, a 20 GW high pulse-energy repetitive PFN-Marx generator, and a coaxial Marx generator based on ceramic capacitors. The research of key technologies and their development status are discussed, which can provide a reference for the future development and application of miniaturization of compact and repetitive Marx generators.

An anti-resonance pulse forming network (PFN) has been designed, analyzed, and tested for its application in generating quasi-square pulses. According to the circuit simulations, a compact generator based on two/three-section network was constructed. Two-section network is applied in the generator due to its compact structure, while three-section network is employed for generating pulses with higher quality. When two-section network is applied in the generator, the full-width at half-maximum of the load pulse is 400 ns, at the same time, its rise time, flat top and fall time are 90, 180 and 217 ns, respectively. When the three-section network is applied with the same pulse width of the load pulse, the rise time of the output decreases to 60 ns, while the flat top increases to 240 ns and the fall time reduces to 109 ns. Meanwhile, this kind of network could be used to shape the output pulses of generators whose equivalent circuit is LC series discharge network, such as MARX generator, into quasi-square pulses. And the preliminary experiment demonstrates that anti-resonance network could work well on four-stage Marx generators. A sine pulse generated by the four-stage Marx generator is shaped into a quasi-square pulse with voltage of 11.8 kV and pulse width about 110 ns based on two-section anti-resonance network.

This paper elaborates the effect of unmatched stored energy in high-voltage high-energy pulsed power systems. High-voltage insulation failure of KALI system is analyzed thoroughly for its occurrence. According to the simulations and analysis energy mismatch of MARX generator and Blumlein transmission line is found to be the most significant cause for high-voltage failure of the system. MARX generator and Blumlein of KALI are redesigned to attain better energy balance at same voltage level. Observations, simulation and analytical results are illustrated in the following sections.