A new approach to target development for laboratory astrophysics experiments at high-power laser facilities is presented. With the dawn of high-power lasers, laboratory astrophysics has emerged as a field, bringing insight into physical processes in astrophysical objects, such as the formation of stars. An important factor for success in these experiments is targetry. To date, targets have mainly relied on expensive and challenging microfabrication methods. The design presented incorporates replaceable machined parts that assemble into a structure that defines the experimental geometry. This can make targets cheaper and faster to manufacture, while maintaining robustness and reproducibility. The platform is intended for experiments on plasma flows, but it is flexible and may be adapted to the constraints of other experimental setups. Examples of targets used in experimental campaigns are shown, including a design for insertion in a high magnetic field coil. Experimental results are included, demonstrating the performance of the targets.

Experimental studies are key to investigating the physical and chemical processes that drive cloud and haze formation from gas and solid phase molecular precursors in (exo)planetary environments, and validating the theoretical calculations used in models of (exo)planetary atmospheres. They allow characterizing the physical, optical, and chemical properties of laboratory-generated analogs, hence providing critical input parameters to models for observational data analysis. In this paper, we present examples of (1) experiments performed with different facilities to produce analogs of Titan and exoplanet atmospheric aerosols from gas phase molecular precursors, and (2) the characterization of these analogs to provide information on their composition, morphology, and optical constants to the scientific community. We also introduce the recently launched NASA Center for Optical Constants (NCOC), which will provide this critical data to the scientific community for (exo)planetary-relevant ices and organic refractory materials produced in the laboratory from the irradiation of gas and ice precursors.

The paper corresponds to the session organised by the IAU inter-commission B2-B5 working group “Laboratory Astrophysics Data Compilation, Validation and Standardization: from the Laboratory to FAIR usage in the Astronomical Community” at the IAU 2022 General Assembly. The session included talks about the usage and implementation of FAIR concepts in VAMDC and in the IVOA, then domain specific talks oriented towards planetology, dust and ices. The program (doi.org/10.5281/zenodo.7050654) and the various talks can be found in the ZENODO “cb5-labastro” community (zenodo.org/communities/cb5-labastro).

The building of online atomic and molecular databases for astrophysics and for other research fields started with the beginning of the internet. These databases have encompassed different forms: databases of individual research groups exposing their own data, databases providing collected data from the refereed literature, databases providing evaluated compilations, databases providing repositories for individuals to deposit their data, and so on. They were, and are, the replacement for literature compilations with the goal of providing more complete and in particular easily accessible data services to the users communities. Such initiatives involve not only scientific work on the data, but also the characterization of data, which comes with the “standardization” of metadata and of the relations between metadata, as recently developed in different communities. This contribution aims at providing a representative overview of the atomic and molecular databases ecosystem, which is available to the astrophysical community and addresses different issues linked to the use and management of data and databases. The information provided in this paper is related to the keynote lecture “Atomic and Molecular Databases: Open Science for better science and a sustainable world” whose slides can be found at DOI : doi.org/10.5281/zenodo.6979352 on the Zenodo repository connected to the “cb5-labastro” Zenodo Community (https://zenodo.org/communities/cb5-labastro).

This paper corresponds to an invited oral contribution to the session 5A organised by the IAU inter-commission B2-B5 working group (WG) “Laboratory Astrophysics Data Compilation, Validation and Standardization: from the Laboratory to FAIR usage in the Astronomical Community” at the IAU 2022 General Assembly (GA) Rengel (2022). This WG provides a platform where to discuss the Findability, Accessibility,Interoperability, Reuse (FAIR) usage of laboratory Atomic and Molecular (A&M) data in astronomy and astrophysics.

A&M data play a key role in the understanding of the physics and chemistry of processes in several research topics, including planetary science and interdisciplinary research in particular the atmospheres of planets and planetary explorations, etc. Databases, compilation of spectroscopic parameters, and facility tools are used by computer codes to interpret spectroscopic observations and simulate them. In this talk I presented existing A&M databases of interest to the planetary community focusing on access, organisation, infrastructures, limitations and issues, etc.

Laboratory experiments are found to be extremely important in the field of planetary and exoplanetary science. In this proceeding, I cover three aspects of my envisioned next-generation laboratory research and the previous and current works of our group on achieving these visions. I will include three topics: 1) using material science techniques to study planetary materials, 2) collaborative laboratory research on planetary and exoplanetary haze analogs, and 3) building a robust laboratory database to better understand various atmospheric and surface processes on Titan and exoplanets. I will also elaborate on how such laboratory work could power next-generation space missions such as the Dragonfly mission to Titan and the James Webb Space Telescope.

This paper gives an overview of the IAU B5 commission session on “Laboratory Astrophysics Activities” at the 2022 IAU General Assembly (GA). It provides a brief overview of the talks that were given in that session. The IAU 2022 GA B5 commission meeting was organised to present Laboratory Astrophysics activities in various parts of the world in an attempt to provide a first step towards a “Global Network of Laboratory Astrophysics Network of Activities and Data”. The program (10.5281/zenodo.7051332) and the presentations can be found in the ZENODO “cb5-labastro” community (https://zenodo.org/communities/cb5-labastro).

We report on the design and first results from experiments looking at the formation of radiative shocks on the Shenguang-II (SG-II) laser at the Shanghai Institute of Optics and Fine Mechanics in China. Laser-heating of a two-layer CH/CH–Br foil drives a $\sim 40$ km/s shock inside a gas cell filled with argon at an initial pressure of 1 bar. The use of gas-cell targets with large (several millimetres) lateral and axial extent allows the shock to propagate freely without any wall interactions, and permits a large field of view to image single and colliding counter-propagating shocks with time-resolved, point-projection X-ray backlighting ($\sim 20$ μm source size, 4.3 keV photon energy). Single shocks were imaged up to 100 ns after the onset of the laser drive, allowing to probe the growth of spatial nonuniformities in the shock apex. These results are compared with experiments looking at counter-propagating shocks, showing a symmetric drive that leads to a collision and stagnation from $\sim 40$ ns onward. We present a preliminary comparison with numerical simulations with the radiation hydrodynamics code ARWEN, which provides expected plasma parameters for the design of future experiments in this facility.

In this paper, we present a reanalysis of the silicon He-$\mathrm{\alpha}$ X-ray spectrum emission in Fujioka et al.’s 2009 photoionization experiment. The computations were performed with our radiative-collisional code, RCF. The central ingredients of our computations are accurate atomic data, inclusion of satellite lines from doubly excited states and accounting for the reabsorption of the emitted photons on their way to the spectrometer. With all these elements included, the simulated spectrum turns out to be in good agreement with the experimental spectrum.

Magnetic reconnection driven by laser plasma interactions attracts great interests in the recent decades. Motivated by the rapid development of the laser technology, the ultra strong magnetic field generated by the laser-plasma accelerated electrons provides unique environment to investigate the relativistic magnetic field annihilation and reconnection. It opens a new way for understanding relativistic regimes of fast magnetic field dissipation particularly in space plasmas, where the large scale magnetic field energy is converted to the energy of the nonthermal charged particles. Here we review the recent results in relativistic magnetic reconnection based on the laser and collisionless plasma interactions. The basic mechanism and the theoretical model are discussed. Several proposed experimental setups for relativistic reconnection research are presented.

A developing application of laser-driven currents is the generation of magnetic fields of picosecond–nanosecond duration with magnitudes exceeding $B=10~\text{T}$. Single-loop and helical coil targets can direct laser-driven discharge currents along wires to generate spatially uniform, quasi-static magnetic fields on the millimetre scale. Here, we present proton deflectometry across two axes of a single-loop coil ranging from 1 to 2 mm in diameter. Comparison with proton tracking simulations shows that measured magnetic fields are the result of kiloampere currents in the coil and electric charges distributed around the coil target. Using this dual-axis platform for proton deflectometry, robust measurements can be made of the evolution of magnetic fields in a capacitor coil target.

The development of tunable dye lasers and a simple atomic and ionic beam source for all elements were critical in establishing a reliable absolute scale for atomic transition probabilities in the optical to near UV regions. The laboratory astrophysics program at the University of Wisconsin - Madison (UW) concentrates on neutral and singly-ionized species transitions that are observable in astronomical spectra of cool stars, emphasizing the rare earth n(eutron)-capture elements and the Fe-group elements that are important inputs to early Galactic nucleosynthesis studies. The UW program is one of several productive efforts on atomic transition probabilities. These programs generally use time-resolved laser-induced-fluorescence (TR-LIF) to accurately measure total decay rates and data from high resolution Fourier transform spectrometers (FTSs) to determine emission branching fractions (BFs). The UW laboratory results almost always are directly linked to astronomical chemical composition efforts. There are good opportunities to extend similar research to other wavelength regions.

An exotic molecular inventory exists in space. While some species have well-known terrestrial analogs, others are very reactive and can hardly survive in the laboratory timely to allow for their characterization. With an eye toward these latter, we highlight in this contribution the role of quantum chemistry in providing astrochemically relevant data where experiment struggles. Special attention is given to the concept of molecular potential energy surfaces (PESs), a key aspect in theoretical chemical physics, and the possible dynamical attributes taken therefrom. As case studies, we outline our current efforts in obtaining global PESs of carbon clusters. It is thus hoped that, with such an active synergy between theoretical chemistry and state-of-the-art experimental/observational techniques (the pillars to the modern laboratory astrophysics), scientists may gather the required knowledge to explain the origins, abundances and the driving force toward molecular complexity in the Universe.

This paper describes a model of electron energization and cyclotron-maser emission applicable to astrophysical magnetized collisionless shocks. It is motivated by the work of Begelman, Ergun and Rees [Astrophys. J. 625, 51 (2005)] who argued that the cyclotron-maser instability occurs in localized magnetized collisionless shocks such as those expected in blazar jets. We report on recent research carried out to investigate electron acceleration at collisionless shocks and maser radiation associated with the accelerated electrons. We describe how electrons accelerated by lower-hybrid waves at collisionless shocks generate cyclotron-maser radiation when the accelerated electrons move into regions of stronger magnetic fields. The electrons are accelerated along the magnetic field and magnetically compressed leading to the formation of an electron velocity distribution having a horseshoe shape due to conservation of the electron magnetic moment. Under certain conditions the horseshoe electron velocity distribution function is unstable to the cyclotron-maser instability [Bingham and Cairns, Phys. Plasmas 7, 3089 (2000); Melrose, Rev. Mod. Plasma Phys. 1, 5 (2017)].

The study of structure, thermodynamic state, equation of state (EOS) and transport properties of warm dense matter (WDM) has become one of the key aspects of laboratory astrophysics. This field has demonstrated its importance not only concerning the internal structure of planets, but also other astrophysical bodies such as brown dwarfs, crusts of old stars or white dwarf stars. There has been a rapid increase in interest and activity in this field over the last two decades owing to many technological advances including not only the commissioning of high energy optical laser systems, z-pinches and X-ray free electron lasers, but also short-pulse laser facilities capable of generation of novel particle and X-ray sources. Many new diagnostic methods have been developed recently to study WDM in its full complexity. Even ultrafast nonequilibrium dynamics has been accessed for the first time thanks to subpicosecond laser pulses achieved at new facilities. Recent years saw a number of major discoveries with direct implications to astrophysics such as the formation of diamond at pressures relevant to interiors of frozen giant planets like Neptune, metallic hydrogen under conditions such as those found inside Jupiter’s dynamo or formation of lonsdaleite crystals under extreme pressures during asteroid impacts on celestial bodies. This paper provides a broad review of the most recent experimental work carried out in this field with a special focus on the methods used. All typical schemes used to produce WDM are discussed in detail. Most of the diagnostic techniques recently established to probe WDM are also described. This paper also provides an overview of the most prominent examples of these methods used in experiments. Even though the main emphasis of the publication is experimental work focused on laboratory astrophysics primarily at laser facilities, a brief outline of other methods such as dynamic compression with z-pinches and static compression using diamond anvil cells (DAC) is also included. Some relevant theoretical and computational efforts related to WDM and astrophysics are mentioned in this review.

Astrophysical collisionless shocks are amazing phenomena in space and astrophysical plasmas, where supersonic flows generate electromagnetic fields through instabilities and particles can be accelerated to high energy cosmic rays. Until now, understanding these micro-processes is still a challenge despite rich astrophysical observation data have been obtained. Laboratory astrophysics, a new route to study the astrophysics, allows us to investigate them at similar extreme physical conditions in laboratory. Here we will review the recent progress of the collisionless shock experiments performed at SG-II laser facility in China. The evolution of the electrostatic shocks and Weibel-type/filamentation instabilities are observed. Inspired by the configurations of the counter-streaming plasma flows, we also carry out a novel plasma collider to generate energetic neutrons relevant to the astrophysical nuclear reactions.

The physics of compressible turbulence in high energy density (HED) plasmas is an unchartered experimental area. Simulations of compressible and radiative flows relevant for astrophysics rely mainly on subscale parameters. Therefore, we plan to perform turbulent hydrodynamics experiments in HED plasmas (TurboHEDP) in order to improve our understanding of such important phenomena for interest in both communities: laser plasma physics and astrophysics. We will focus on the physics of supernovae remnants which are complex structures subject to fluid instabilities such as the Rayleigh–Taylor and Kelvin–Helmholtz instabilities. The advent of megajoule laser facilities, like the National Ignition Facility and the Laser Megajoule, creates novel opportunities in laboratory astrophysics, as it provides unique platforms to study turbulent mixing flows in HED plasmas. Indeed, the physics requires accelerating targets over larger distances and longer time periods than previously achieved. In a preparatory phase, scaling from experiments at lower laser energies is used to guarantee the performance of future MJ experiments. This subscale experiments allow us to develop experimental skills and numerical tools in this new field of research, and are stepping stones to achieve our objectives on larger laser facilities. We review first in this paper recent advances in high energy density experiments devoted to laboratory astrophysics. Then we describe the necessary steps forward to commission an experimental platform devoted to turbulent hydrodynamics on a megajoule laser facility. Recent novel experimental results acquired on LULI2000, as well as supporting radiative hydrodynamics simulations, are presented. Together with the development of LiF detectors as transformative X-ray diagnostics, these preliminary results are promising on the way to achieve micrometric spatial resolution in turbulent HED physics experiments in the near future.

The influence of a strong external magnetic field on the collimation of a high Mach number plasma flow and its collision with a solid obstacle is investigated experimentally and numerically. The laser irradiation ( $I\sim 2\times 10^{14}~\text{W}\cdot \text{cm}^{-2}$ ) of a multilayer target generates a shock wave that produces a rear side plasma expanding flow. Immersed in a homogeneous 10 T external magnetic field, this plasma flow propagates in vacuum and impacts an obstacle located a few mm from the main target. A reverse shock is then formed with typical velocities of the order of 15–20 $\pm$ 5 km/s. The experimental results are compared with 2D radiative magnetohydrodynamic simulations using the FLASH code. This platform allows investigating the dynamics of reverse shock, mimicking the processes occurring in a cataclysmic variable of polar type.

A novel laboratory experimental design is described that will investigate the processing of dust grains in astrophysical shocks. Dust is a ubiquitous ingredient in the interstellar medium (ISM) of galaxies; however, its evolutionary cycle is still poorly understood. Especially shrouded in mystery is the efficiency of grain destruction by astrophysical shocks generated by expanding supernova remnants. While the evolution of these remnants is fairly well understood, the grain destruction efficiency in these shocks is largely unknown. The experiments described herein will fill this knowledge gap by studying the dust destruction efficiencies for shock velocities in the range ${\sim}10{-}30~\text{km}/\text{s}$ ($\unicode[STIX]{x03BC}\text{m}/\text{ns}$), at which most of the grain destruction and processing in the ISM takes place. The experiments focus on the study of grain–grain collisions by accelerating small (${\sim}1~\unicode[STIX]{x03BC}\text{m}$) dust particles into a large (${\sim}5{-}10~\unicode[STIX]{x03BC}\text{m}$ diameter) population; this simulates the astrophysical system well in that the more numerous, small grains impact and collide with the large population. Facilities that combine the versatility of high-power optical lasers with the diagnostic capabilities of X-ray free-electron lasers, e.g., the Matter in Extreme Conditions instrument at the SLAC National Accelerator Laboratory, provide an ideal laboratory environment to create and diagnose dust destruction by astrophysically relevant shocks at the micron scale.