In this paper, a switch function-based gas-kinetic scheme (SF-GKS) is presented for the simulation of inviscid and viscous compressible flows. With the finite volume discretization, Euler and Navier-Stokes equations are solved and the SF-GKS is applied to evaluate the inviscid flux at cell interface. The viscous flux is obtained by the conventional smooth function approximation. Unlike the traditional gas-kinetic scheme in the calculation of inviscid flux such as Kinetic Flux Vector Splitting (KFVS), the numerical dissipation is controlled with a switch function in the present scheme. That is, the numerical dissipation is only introduced in the region around strong shock waves. As a consequence, the present SF-GKS can well capture strong shock waves and thin boundary layers simultaneously. The present SF-GKS is firstly validated by its application to the inviscid flow problems, including 1-D Euler shock tube, regular shock reflection and double Mach reflection. Then, SF-GKS is extended to solve viscous transonic and hypersonic flow problems. Good agreement between the present results and those in the literature verifies the accuracy and robustness of SF-GKS.

This paper develops a high-order accurate gas-kinetic scheme in the framework of the finite volume method for the one- and two-dimensional flow simulations, which is an extension of the third-order accurate gas-kinetic scheme [Q.B. Li, K. Xu, and S. Fu, J. Comput. Phys., 229(2010), 6715-6731] and the second-order accurate gas-kinetic scheme [K. Xu, J. Comput. Phys., 171(2001), 289-335]. It is formed by two parts: quartic polynomial reconstruction of the macroscopic variables and fourth-order accurate flux evolution. The first part reconstructs a piecewise cell-center based quartic polynomial and a cell-vertex based quartic polynomial according to the “initial” cell average approximation of macroscopic variables to recover locally the non-equilibrium and equilibrium single particle velocity distribution functions around the cell interface. It is in view of the fact that all macroscopic variables become moments of a single particle velocity distribution function in the gas-kinetic theory. The generalized moment limiter is employed there to suppress the possible numerical oscillation. In the second part, the macroscopic flux at the cell interface is evolved in fourth-order accuracy by means of the simple particle transport mechanism in the microscopic level, i.e. free transport and the Bhatnagar-Gross-Krook (BGK) collisions. In other words, the fourth-order flux evolution is based on the solution (i.e. the particle velocity distribution function) of the BGK model for the Boltzmann equation. Several 1D and 2D test problems are numerically solved by using the proposed high-order accurate gas-kinetic scheme. By comparing with the exact solutions or the numerical solutions obtained the second-order or third-order accurate gas-kinetic scheme, the computations demonstrate that our scheme is effective and accurate for simulating invisid and viscous fluid flows, and the accuracy of the high-order GKS depends on the choice of the (numerical) collision time.

The development of high-order schemes has been mostly concentrated on the limiters and high-order reconstruction techniques. In this paper, the effect of the flux functions on the performance of high-order schemes will be studied. Based on the same WENO reconstruction, two schemes with different flux functions, i.e., the fifth-order WENO method and the WENO-Gas-kinetic scheme (WENO-GKS), will be compared. The fifth-order finite difference WENO-SW scheme is a characteristic variable reconstruction based method which uses the Steger-Warming flux splitting for inviscid terms, the sixth-order central difference for viscous terms, and three stages Runge-Kutta time stepping for the time integration. On the other hand, the finite volume WENO-GKS is a conservative variable reconstruction based method with the same WENO reconstruction. But, it evaluates a time dependent gas distribution function along a cell interface, and updates the flow variables inside each control volume by integrating the flux function along the boundary of the control volume in both space and time. In order to validate the robustness and accuracy of the schemes, both methods are tested under a wide range of flow conditions: vortex propagation, Mach 3 step problem, and the cavity flow at Reynolds number 3200. Our study shows that both WENO-SW and WENO-GKS yield quantitatively similar results and agree with each other very well provided a sufficient grid resolution is used. With the reduction of mesh points, the WENO-GKS behaves to have less numerical dissipation and present more accurate solutions than those from the WENO-SW in all test cases. For the Navier-Stokes equations, since the WENO-GKS couples inviscid and viscous terms in a single flux evaluation, and the WENO-SW uses an operator splitting technique, it appears that the WENO-SW is more sensitive to the WENO reconstruction and boundary treatment. In terms of efficiency, the finite volume WENO-GKS is about 4 times slower than the finite differenceWENO-SW in two dimensional simulations. The current study clearly shows that besides high-order reconstruction, an accurate gas evolution model or flux function in a high-order scheme is also important in the capturing of physical solutions. In a physical flow, the transport, stress deformation, heat conduction, and viscous heating are all coupled in a single gas evolution process. Therefore, it is preferred to develop such a scheme with multi-dimensionality, and unified treatment of inviscid and dissipative terms. A high-order scheme does prefer a high-order gas evolution model. Even with the rapid advances of high-order reconstruction techniques, the first-order dynamics of the Riemann solution becomes the bottleneck for the further development of high-order schemes. In order to avoid the weakness of the low order flux function, the development of high-order schemes relies heavily on the weak solution of the original governing equations for the update of additional degree of freedom, such as the non-conservative gradients of flow variables, which cannot be physically valid in discontinuous regions.

The gas-kinetic scheme is applied to a depth-integrated continuum model for avalanche flows, namely the Savage-Hutter model. In this method, the continuum fluxes are calculated based on the pseudo particle motions which are relaxed from nonequilibrium to equilibrium states. The processes are described by the Bhatnagar-Gross-Krook (BGK) equation. The benefit of this scheme is its capability to resolve shock discontinuities sharply and to handle the vacuum state without special treatments. Because the Savage-Hutter equation bears an anisotropic stress on the tangential space of the topography, the equilibrium distribution function of the microscopic particles are shown to be bi-Maxwellian. These anisotropic stresses are the key to preserve the coordinate objectivity in the Savage-Hutter model. The effect of the anisotropic stress is illustrated by two examples: an axisymmetric dam break and a finite mass sliding on an inclined plane chute. It is found that the propagation of the flow fronts significantly depends on the orientation of the principal axes of the tangential stresses.