This paper presents the design of frequency-tunable dual-band, tri-band and quad-band bandpass filters (BPFs). The proposed three BPFs can be independently tuned and individually switched by varying the capacitances of the varactors. In the designed tunable dual-band BPF (TD-BPF), common input/output feed lines are utilized for two tunable dual-mode resonators (TDRs). Further, three TDRs and four TDRs are employed to achieve tunable tri-band BPF (TT-BPF) and tunable quad-band BPF (TQ-BPF), respectively. Then, the TD-BPF and the TT-BPF are fabricated and measured to verify individual tunability and independent switchability. For the TD-BPF, the measurement results show that the center frequency (CF) of the first passband varies from 1.37 to 1.62 GHz, and the CF of the second passband varies from 2.3 to 2.64 GHz. In the measured TT-BPF, the tuning ranges of CFs of three passbands are 1.3–1.5 GHz, 2.36–2.6 GHz, and 3–3.54 GHz, respectively.

A high-isolation diplexer based on a dual-mode substrate integrated waveguide (SIW) resonator is proposed in this paper. Based on the theory of the dual-mode resonator, the miniaturized diplexers are designed by using the SIW dual-mode resonators. The superior isolation of the diplexers is obtained because the two operating modes of the dual-mode SIW resonators are not directly coupled and there is no interference with each other. In order to further improve the isolation of the circuit, the number of the order of the diplexer is added. Equivalent circuits are given to analyze and design the dual-mode high-isolation diplexers. Detailed analyses are given according to the equivalent circuits. The dual-mode third-order and fourth-order diplexers are designed and fabricated. The measured results agree well with the simulated ones. The total sizes of the fabricated third-order and fourth-order diplexers are 1.78λg × 2.64λg and 1.79λg × 3.63λg, respectively.

A compact high-isolation power divider with bandpass response and high-frequency selectivity is presented in this letter. Two dual-mode resonators are used to realize filtering response. The circuit size of the proposed power divider can be reduced by using dual-mode capacitance loaded square meander loop resonators. Due to capacitive load, the resonator can exhibit slow-wave characteristics, which can be utilized to suppress harmonics and reduce size. The simulated and measured results show reasonable agreement.

A new planar microstrip-fed monopole ultra-wideband (UWB) antenna with dual notched bands has been presented. By employing a simple dual-mode resonator with two symmetrical outer high-impedance lines beside the microstrip feed line of the proposed UWB antenna, two controllable rejection bands with high-frequency selectivity are created. The parametric studies of the proposed structure are explored for the dual band-notched operating mechanism. Finally, the experimental results, including return losses, radiation patterns, and peak gains are shown, declaring that the proposed antenna has good impedance matching performance and radiation pattern properties.

A reconfigurable band-pass filter with switchable bandwidth, for wireless applications is demonstrated using a dual-mode microstrip square-loop resonator. The proposed filter has been designed on Rogers RO4003C and achieves switchable bandwidth by changing the length of two tuning stubs with the implementation of two strategically placed p-i-n diodes as switching elements. The filter was designed with a center frequency of 2.4 GHz and the two distinct operation states have bandwidths, 113 MHz (4.8%) with an insertion loss of 1.2 dB and 35 MHz (1.5%) with an insertion loss of 1.5 dB. The physical size of the fabricated reconfigurable filter including the implementation of the DC bias lines is comparable to the size of a conventional filter.

In this work, multi-mode resonator technology is applied to finline bandstop filter (BSF) to improve its performance. A finline BSF with two transmission zeros in the stopband is realized by using a new kind of dual-mode finline resonator proposed in this paper. The bandwidth of the designed filter is clearly broadened to three times that of the traditional finline BSF without enlarging its size. Its measured bandwidth under 20 dB rejection is about 600 MHz and the insertion loss in the passband is below 0.4 dB including the insertion loss of two finline-to-waveguide transitions. There is a good agreement between the simulated and measured results.