The robotic intervention has great potential in the rehabilitation of post-stroke patients to regain their lost mobility. In this paper, firstly, we present a design of a novel, 7 degree-of-freedom (DOF) upper limb robotic exoskeleton (u-Rob) that features shoulder scapulohumeral rhythm with a wide range of motions (ROM) compared to other existing exoskeletons. An ergonomic shoulder mechanism with two passive DOF was included in the proposed exoskeleton to provide scapulohumeral motion with corresponding full ROM. Also, the joints of u-Rob have more range of motions compared to its existing counterparts. Secondly, we propose a fractional sliding mode control (FSMC) to control u-Rob. Applying the Lyapunov theory to the proposed control algorithm, we showed the stability of it. To control u-Rob, FSMC has shown effectiveness to handle unmodeled dynamics (e.g. friction, disturbance, etc.) in terms of better tracking and chatter compared to traditional SMC.

This paper addresses three control implementation issues for trajectory tracking of robotic manipulators: unmodeled dynamics, unknown input saturation and peaking effects during the transient phase. A model-free first-order robust-adaptive control method is used to deal with the unmodeled dynamics. Robust optimality and stability of the controller are proved using the 𝓗∞ technique and the game-algebraic Riccati equation. An intuitive approach is devised to incorporate the unknown input saturation by modifying the speed of the desired trajectory. The trajectory scaling is performed by using only the state errors. Furthermore, two different techniques are utilized to suppress peaking during the transient response of the trajectory tracking. The first method adds an extra term in the input while the second method uses variable gain to improve the transient response. A systematic procedure for finding the controller parameters is formulated using features, such as rise time and settling time. A three-degree-of-freedom robot manipulator is used for the validation of the proposed controller in simulations and experiments.

In recent years, soft robotics is widely considered as the most promising field for both research and application. First of all, the actuator is fundamental for designing, modeling, and controlling of soft robots. This paper presents a new type of pneumatic trunk-like soft actuator, which contains a chamber for stiffness adjustment in addition to three chambers for driving. Thus, the salient feature of the proposed actuator is the ability of stiffness self-regulation. The structure of the proposed actuator is described in detail. Then the theoretical models for elongation and bending motion of the actuator are established. The elongation as well as single-chamber and multi-chamber driving bending of the actuator were tested to verify the mathematical models. Finally, a dual-segment soft robot based on the proposed trunk-like soft actuator was developed and tested by experiments, which implies its potential application in practice.

This paper concerns with comparing simulation studies for a newly developed concept of turning point to be used in multiple robot path planning. Different critical factors and design parameters are collected and statistical analyses are performed. After configuring different simulation scenarios, the efficient one is evaluated using a robust data envelopment analysis (RDEA). Due to uncertain aspects of various simulations scenarios, robust version of data envelopment analysis is proposed. Here, major criteria in robot path planning are deadlock and conflict avoidance, throughput, mean flow time, and effective total distance travelled. To determine the effective experiment for the proposed simulation model, RDEA is used. A comparative study with respect to different experiments having various simulation setting is developed. The results for a real robotic manufacturing cell system show effectiveness of the proposed process. Also, the efficient simulation software is determined by multiaspect analysis.

This paper describes the development of a gecko-inspired robotic gripper for grasping flat objects using Scott–Russell mechanisms. Compared to previously reported grippers that utilize gecko-like adhesives, the one presented here produces higher normal adhesion and has robustness and controllability advantages. To verify the applicability of proposed gripper, a mechanical model and experimental results on a variety of substrates are presented. The experimental results demonstrated a 19.6% and 50% increase in normal adhesion using a preload of <15 and <30 N, respectively, compared to previously reported results under similar testing parameters and conditions.

In this paper, a new mobile cable-driven parallel robot is proposed by mounting a spatial cable robot on a wheeled mobile robot. This system includes all the advantages of cable robots such as high ratio of payload to weight and good stiffness and accuracy while its deficiency of limited workspace is eliminated by the aid of its mobile chassis. The combined system covers a vast workspace area whereas it has negligible vibrations and cable sag due to using shorter cables. The dynamic equations are derived using Gibbs–Appell formulation considering viscoelasticity of the cables. Therefore, the more realistic viscoelastic cable model of the robot reveals the system flexibility effect and shows the requirements needed to control the end-effector in the conditions with cable elasticity. The viscoelastic system stability is investigated based on the input–output feedback linearization and using only the actuators feedback data. Feedback linearization controller is equipped by two additional controllers, that is, the optimal controller based on Linear Quadratic Regulator (LQR) method and finite horizon model predictive approach. They are used to control the system compromising between the control effort and error signals of the feedback linearized system. The applied control input to the robot plant is the voltage signal limited to a specified band. The validity of modeling and the designed controller efficiency are investigated using MATLAB simulation and its verification is accomplished by experimental tests conducted on the manufactured cable robot, ICaSbot.

Against the backdrop of accelerated ageing around the globe, an increasing number of individuals suffer from hip motion disability and gait disorders. In this paper, the performance analysis of a novel parallel assistive mechanism with 2 DOF for hip adduction/abduction (AB/AD) and flexion/extension (FL/EX) assistance is completed and evaluated, particularly the velocity and force transfer features. The analysis shows that the assistive mechanism has advantages of fine motion assistive isotropy, high force transfer ratio and large force isotropic radius, which indicates that the parallel assistive mechanism is suitable for hip AB/AD and FL/EX assistance.

A hybrid-trajectory based terminal sliding mode controller (TSMC) is addressed for a free-flying two-flexible-link space manipulator with an elastic base. In this system, there are unknown but bounded external disturbances and parameters. First, the Lagrange dynamic model of the manipulator was established by the momentum conservation. Second, a TSMC based on desired trajectory was proposed, by which the terminal trajectories were asymptotically tracked and periodic flexible vibrations were excited. Then based on virtual control force, hybrid trajectories were generated, in which the flexible variables, the joint angular displacement errors and the base’s attitude error were considered. Finally, a hybrid-trajectory TSMC was presented, by which the terminal trajectories were asymptotically tracked and the flexible vibrations were suppressed.

In the present work, the ankle rehabilitation robot (ARR) dynamic model that implements a new series of connection control strategies is introduced. The dynamic models are presented in this regard. This model analyzes the robot LuGre friction model and the nonlinear disturbance model. To improve the ARR system’s rapidity and robustness, a composite 2-degree of freedom (2-DOF) internal model control (IMC) controller is presented. The control performance of the compound 2-DOF IMC controller is simulated and analyzed in the present work. The simulation shows that the composite 2-DOF IMC controller has high following performance. For practical testing purposes, 1-DOF passive training and predetermined trajectory following have been completed for different swing amplitudes and frequencies. Moreover, the thrust and tension torque of the robotic dynamic and static loading characteristics are studied in active control mode. The experimental results show the effectiveness of passive training of the given trajectory and impedance training active control strategy. This paper gives the specific functions of ARR.