No CrossRef data available.
Article contents
Innovative Design in Factory - New Methods to Go from Closed to Expandable Prescriptions at the Shop Floor Level
Published online by Cambridge University Press: 26 July 2019
Abstract
This paper explores the question of the design activity at the shop floor level. The design activity has been confined for a large part in the design and the methods office. However, a certain form of design adapted to the factory remains. It is necessary to solve the problems which appear during the manufacturing process and to improve the productivity. However another form of design can emerge; it has a stronger impact on the factory, since the rules of the manufacturing system are modified under its effect. The paper studies 21 cases of design in the Airbus factory at Saint-Nazaire. It shows that the design activity does exist at the shop floor level. It characterizes this activity distinguishing two types of design which can co-exist in a factory. It shows that the type of results reached is not the same according to the type of design implemented.
- Type
- Article
- Information
- Proceedings of the Design Society: International Conference on Engineering Design , Volume 1 , Issue 1 , July 2019 , pp. 1165 - 1174
- Creative Commons
- This is an Open Access article, distributed under the terms of the Creative Commons Attribution-NonCommercial-NoDerivatives licence (http://creativecommons.org/licenses/by-nc-nd/4.0/), which permits non-commercial re-use, distribution, and reproduction in any medium, provided the original work is unaltered and is properly cited. The written permission of Cambridge University Press must be obtained for commercial re-use or in order to create a derivative work.
- Copyright
- © The Author(s) 2019