Hostname: page-component-78c5997874-g7gxr Total loading time: 0 Render date: 2024-11-02T23:22:44.315Z Has data issue: false hasContentIssue false

On the Critical Layer Thickness of Strained-Layer Heteroepitaxial CoSi2 Films on 〈111〉Si

Published online by Cambridge University Press:  28 February 2011

David N. Jamieson
Affiliation:
California Institute of Technology, Pasadena, CA, 91125
G. Bai
Affiliation:
California Institute of Technology, Pasadena, CA, 91125
Y. C. Kao
Affiliation:
Electrical Engineering Dept., University of California at Los Angeles, Los Angeles, CA 90024
C. W. Nieh
Affiliation:
California Institute of Technology, Pasadena, CA, 91125
M-A. Nicolet
Affiliation:
California Institute of Technology, Pasadena, CA, 91125
K. L. Wang
Affiliation:
Electrical Engineering Dept., University of California at Los Angeles, Los Angeles, CA 90024
Get access

Abstract

The technique of Double Crystal X-Ray Diffractometry (DXD) and ion beam channeling are applied to investigate, as a function of thickness, the average perpendicular strain and crystal quality of CoSi2 layers grown by MBE on 〈111〉Si. The results show that thin layers (from 20 to 30 nm) are partially relaxed but with a strain greater than that expected for a free CoSi2 lattice. For layers thicker than 30nm the magnitude of the CoSi2 strain incrgases to 1.7%, somewhat less than the maximum magnitude strain expected for coherent growth (2.1%). For layers thicker than 50 nm, the perpendicular strain relaxes very slowly, with the strain at 225 nm only 5% less than that at 50nm. It was concluded that a coherent epitaxial layer does not form initially and the relaxation of the strained layers is not consistent with a planar growth mechanism of the CoSi2 epilayers. Therefore the concept of a critical thickness, below which the epilayers are strained and above which the epilayers are relaxed, cannot be applied to our CoSi2/Si system.

Type
Research Article
Copyright
Copyright © Materials Research Society 1987

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. Tung, R. T., Bean, J. C., Gibson, J. M., Poate, J. M. and Jacobson, D. C., Appl. Phys. Lett. 40 (1982), 684.Google Scholar
2. Van Der Merwe, J. H., J. Appl. Phys. 34 (1), (1963) 123.Google Scholar
3. Matthews, J. W., Mader, S. and Light, T. B., J. Appl. Phys. 41 (9), (1970) 3800.Google Scholar
4. People, R. and Bean, J. C., Appl. Phys. Lett. 47 (3), (1985) 322 Google Scholar
Appl. Phys. Lett. 49 (4), (1986) 229.Google Scholar
5. Bean, J. C., Feldman, L. C., Fiory, A. T., Nakahara, S. and Robinson, I. K., J. Vac. Sci. Technol. A2 (2), (1984) 436.Google Scholar
6. Orders, P. J. and Usher, B. F., Appl. Phys. Lett. 50 (15) (1987) 980.Google Scholar
7. Fontaine, C., Gailliard, J. P., Magli, S., Million, A. and Piaguet, J., Appl. Phys. Lett. 50 (14), (1987) 903.Google Scholar
8. Hamdi, A. H., Nicolet, M-A., Kao, Y. C., Tejwani, M. and Wang, K. L., Mat. Res. Soc. Symp. Proc. Vol. 41, (1985) 355.Google Scholar
9. Gibson, J. M., Bean, J. C., Poate, J. M. and Tung, R. T., Mat. Res. Soc. Symp. Proc. Vol. 10, (1981) 101.Google Scholar
10. Ishibashi, K. and Furukawa, S., Appl. Phys. Lett. 43 (7), (1983) 660.Google Scholar
11. Kao, Y. C., Wang, K. L., DeFresart, E., Hull, R., Bai, G., Jamieson, D. N. and Nicolet, M-A., J. Vac. Sci. Tech. (in press).Google Scholar