Hostname: page-component-cd9895bd7-gvvz8 Total loading time: 0 Render date: 2024-12-28T01:35:24.750Z Has data issue: false hasContentIssue false
  • English
  • Français

Improvement of the Elastic Modulus of Micromachined Structures using Carbon Nanotubes

Published online by Cambridge University Press:  01 February 2011

Prasoon Joshi ,
Nicolás B. Duarte ,
Abhijat Goyal ,
Awnish Gupta ,
Srinivas A. Tadigadapa  and
Peter C. Eklund
Prasoon Joshi
Affiliation:
Departments of Electrical Engineering
Nicolás B. Duarte
Affiliation:
Departments of Electrical Engineering
Abhijat Goyal
Affiliation:
Departments of Electrical Engineering
Awnish Gupta
Affiliation:
Departments of Physics, Pennsylvania State University, University Park, PA 16802.
Srinivas A. Tadigadapa
Affiliation:
Departments of Electrical Engineering
Peter C. Eklund
Affiliation:
Departments of Physics, Pennsylvania State University, University Park, PA 16802.
Get access

Abstract

Microelectromechanical flexural structures have been fabricated using sandwiched multi-layers consisting of bundled singled walled carbon nanotubes(SWNTs) incorporated into silicon nitride (Si3N4) films. The Si3N4-SWNT composite layer was patterned by reactive ion etching followed by release in XeF2 to create freestanding bridge structures. The mechanical stiffness of the micromechanical bridges was monitored via force-displacement (F-D) curves obtained using an Atomic Force Microscope (AFM). Inclusion of SWNTs resulted in an increase in the spring constant of the bridge by as much as 64%, with an average increase of 25%. In a second experiment, micromachined bridges fabricated using dissolved wafer process were coated with debundled SWNTs. The SWNTs suspended in N-methyl-2-pyrrolidinone (NMP) solvent were sprayed locally on each bridge using a piezoelectric print head. Resonance frequency measurements were done in vacuum (∼10-4 Torr) on the bridges after successive SWNT depositions. A 20% increase in the resonance frequency of the bridges was observed. The observed increase in stiffness in the first set of experiments as well as the observed increase in the frequency in the second set of experiments can be attributed to the high axial modulus of elasticity (∼1 TPa) of the carbon nanotubes.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 875: Symposium O – Thin Films - Stresses and Mechanical Properties XI , 2005 , O1.5
Copyright
Copyright © Materials Research Society 2005

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

1. Lakin, K.M. Kline, G.R., and McCarron, K.T., Development of miniature filters for wireless applications. IEEE Transactions on Microwave Theory and Techniques 1995. 43 (12, pt.2): p. 2933–9.Google Scholar
2. Wang, K. Wong, A.-C., and Nguyen, C.T.-C., VHF free-free beam high-Q micromechanical resonators. Journal of Microelectromechanical Systems. 2000, 9(3): p. 347–60.Google Scholar
3. Wang, J. Ren, Z., and Nguyen, C.T.-C.. 1.14-GHz self-aligned vibrating micromechanical disk resonator. in IEEE Radio Frequency Integrated Circuits Symposium (RFIC), 8-10 June 2003. 2003. Philadelphia, PA, USA: IEEE.Google Scholar
4. Popov, V.N. Carbon nanotubes: properties and application. Materials Science & Engineering R: Reports, 2004. R43(3): p. 61–102.Google Scholar
5. Tadigadapa, S. and Ansari, S.M.. Applications of high-performance MEMS pressure sensors based on dissolved wafer process. in Proceedings SENSORS EXPO Baltimore. 1999. Baltimore, MD, USA: Helmers Publishing.Google Scholar
6. Wei, J. et al. , Low temperature wafer anodic bonding. Journal of Micromechanics and Microengineering, 2003. 13(2): p. 217–222.Google Scholar
7. Goyal, A. Cheong, J., and Tadigadapa, S., Tin-based solder bonding for MEMS fabrication and packaging applications. Journal of Micromechanics and Microengineering, 2004. 14(6): p. 819–825.Google Scholar
8. Li, J. et al. , Carbon nanotube sensors for gas and organic vapor detection. Nano Letters, 2003. 3(7): p. 929–933.Google Scholar
9. Sumanasekera, G.U. et al. Thermoelectric study of hydrogen storage in carbon nanotubes. in Making Functional Materials with Nanotubes. Symposium, 26-29 Nov. 2001. 2002. Boston, MA, USA: Mater. Res. Soc.Google Scholar
10. Dillon, A.C. et al. , Storage of hydrogen in single-walled carbon nanotubes. Nature, 1997. 386(6623): p. 377–9.Google Scholar
11. Dujardin, E. et al. , Capillarity and wetting of carbon nanotubes. Science, 1994. 265(5180): p. 1850–2.Google Scholar