Hostname: page-component-586b7cd67f-r5fsc Total loading time: 0 Render date: 2024-11-24T17:07:40.040Z Has data issue: false hasContentIssue false
  • English
  • Français

Glassy Alloy Composite and Non-equilibrium Crystalline Alloy for Information Technology Applications

Published online by Cambridge University Press:  28 March 2011

N. Nishiyama ,
Kana Takenaka ,
Haruko Miura ,
Noriko Saidoh  and
Akihisa Inoue
N. Nishiyama
Affiliation:
RIMCOF Tohoku Univ. Lab., The Materials Process Technology Center, Katahira 2-1-1, Sendai 980-8577, Japan
Kana Takenaka
Affiliation:
RIMCOF Tohoku Univ. Lab., The Materials Process Technology Center, Katahira 2-1-1, Sendai 980-8577, Japan
Haruko Miura
Affiliation:
RIMCOF Tohoku Univ. Lab., The Materials Process Technology Center, Katahira 2-1-1, Sendai 980-8577, Japan
Noriko Saidoh
Affiliation:
RIMCOF Tohoku Univ. Lab., The Materials Process Technology Center, Katahira 2-1-1, Sendai 980-8577, Japan
Akihisa Inoue
Affiliation:
Tohoku Univ., Katahira 2-1-1, Sendai 980-8577, Japan
Get access

Abstract

Present progress in developments of glassy alloy composites for bit-patterned-media and non-equilibrium Cu-based alloys for conductive materials of electrical connectors are reviewed. It is proven that the imprinting of the Pd-based glassy alloy thin film is favorable for the formation of nano-structured devices. Detailed imprinted morphologies formed by different imprinting conditions were examined. In addition, technology of large area imprinting up to 2.5 inches area has been successfully developed and it is now available for production. These technological developments will be utilized for next generation bit-patterned-media with high data density. A newly developed non-equilibrium Cu-Zr-Ag alloy was prepared into sheet form by the combination of casting, cold rolling and annealing. The alloy sheet exhibited high tensile strength of exceeding 1500 MPa and good electrical conductivity of 30% IACS. However, bending ductility should be improved for the actual production of connector. Through the several examinations, remaining issues that should be solved are discussed in the framework of industrialization and commercialization. These obtained results suggest that the glassy alloy composite or non-equilibrium alloy designed by the glass-forming rules have a great potential to develop innovative products in the near future.

Keywords

amorphouscompositenanostructure
Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 1300: Symposium U – Bulk Metallic Glasses and their Applications , 2011 , mrsf10-1300-u07-01
Copyright
Copyright © Materials Research Society 2011

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. Inoue, A., Acta Mater. 48, 279 (2000).Google Scholar
2. Chou, S. Y., Krauss, P. R., Renstrom, P. J., Appl. Phys. Lett. 67, 3114 (1995).Google Scholar
3. Nishiyama, N., Takenaka, K., Togashi, N., Miura, H., Saidoh, N. and Inoue, A., Intermetallics 18, 1983 (2010).Google Scholar
4. Nishiyama, N., Takenaka, K., Saidoh, N., Futamoto, M., Saotome, Y. and Inoue, A., J. Alloys & Comp. in press.Google Scholar
5. Inoue, A., Mater Trans. JIM 36, 866 (1995).Google Scholar
6. Inoue, A., Matsushita, M., Kawamura, Y., Amiya, K., Hayashi, K., Koike, J., Mater. Trans. JIM 43, 580 (2002).Google Scholar
7. Kimura, H., Inoue, A., Muramatsu, N., Shin, K., Yamamoto, T., Mater. Trans. JIM 47, 1595 (2006).Google Scholar
8. Miura, H., Nishiyama, N. Togashi, N., Nishida, M. and Inoue, A., Intermetallics 18, 1860 (2010).Google Scholar
9. Miura, H., Nishiyama, N. and Inoue, A., J. Alloys & Comp., submitted.Google Scholar
10. Nishiyama, N. and Inoue, A., Mater. Trans. JIM 43, 1247 (2002).Google Scholar
11. Nishiyama, N. and Inoue, A., Mater. Trans. JIM 40, 64 (1999).Google Scholar
12. Takenaka, K., Togashi, N., Nishiyama, N. and Inoue, A., Intermetallics 18, 1969 (2010).Google Scholar
13. Japan industrial standard, JIS H3130.Google Scholar
14. Nishiyama, N., Horino, M. and Inoue, A., Mater. Trans. JIM 41, 1432 (2000).Google Scholar