Hostname: page-component-586b7cd67f-dlnhk Total loading time: 0 Render date: 2024-11-24T17:36:02.958Z Has data issue: false hasContentIssue false

Diffuse reflectance spectroscopy of Pu ions in zirconolite and perovskite

Published online by Cambridge University Press:  17 March 2011

E. R. Vance
Affiliation:
Materials and Engineering Science, ANSTO, Menai, NSW 2234, Australia, [email protected]
K. S. Finnie
Affiliation:
Materials and Engineering Science, ANSTO, Menai, NSW 2234, Australia, [email protected]
Y. Zhang
Affiliation:
Materials and Engineering Science, ANSTO, Menai, NSW 2234, Australia, [email protected]
B. D. Begg
Affiliation:
Materials and Engineering Science, ANSTO, Menai, NSW 2234, Australia, [email protected]
Get access

Abstract

Diffuse reflectance spectroscopy measurements at ambient temperatures have been made over the near infrared-visible range (5000-25000 cm−1) on polycrystalline ceramic zirconolite (CaZrTi2O7) and perovskite (CaTiO3) samples doped with Pu4+. The Pu concentrations were varied between 0.001 and 0.1 formula units. The Pu ions gave rise to a number of unresolved intraconfigurational f-f electronic absorption bands of a few hundred cm−1 bandwidth. Pu ions were targeted to substitute in the Ca sites as either trivalent or tetravalent species and as tetravalent species in the Zr site of zirconolite by the appropriate choice of charge compensation and firing atmosphere. There was approximate agreement of the Kubelka-Munk absorption intensities with Beer's Law for the different Pu4+ substitution schemes, apart from some “new” bands, attributed to impurities, observed in the most dilute zirconolite sample. No clear spectral differences were evident when Pu4+ was targeted to Ca or Zr sites in zirconolite. Samples prepared in reducing atmospheres with a view to producing Pu3+ were strongly absorbing, leading to suppression of Pu transitions.

Type
Research Article
Copyright
Copyright © Materials Research Society 2004

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

[1] Ebbinghaus, B. B., VanKonynenburg, R. A., Ryerson, F. J., Vance, E. R., Stewart, M. W. A., Jostsons, A., Allender, J. S., Rankin, T. and Congdon, J., Waste Management '98 (CD-ROM; sess65/65-04), WM Symposia Inc., Tucson, AZ, 1998.Google Scholar
[2] Vance, E. R., Jostsons, A., Moricca, S., Stewart, M. W. A., Day, R. A., Begg, B. D., Hambley, M. J., Hart, K. P. and Ebbinghaus, B. B., in Environmental Issues and Waste Management Technologies in the Ceramic and Nuclear Industries IV, ed. Marra, J. C. and Chandler, G. T., ACS Ceramic Transactions Vol. 93, Columbus, OH, USA, 323–9 (1999).Google Scholar
[3] Begg, B. D., Vance, E. R. and Conradson, S. D., J. Alloys and Compounds 271–273 221–6 (1998).Google Scholar
[4] Begg, B. D., Vance, E. R., Hunter, B. A. and Hanna, J. V., J. Mater. Res., 13, 3181–90 (1997).Google Scholar
[5] Sliva, R. J. and Nitsche, H., in Advances in Plutonium Chemistry 1967-2000, Ed. Hoffman, D. C., American Nuclear Society, La Grange Park, IL, USA, pp.89117 (2002).Google Scholar
[6] Vance, E. R., Lumpkin, G. R., Carter, M. L., Cassidy, D. J., Ball, C. J., Day, R. A. and Begg, B. D., J. Amer. Ceram. Soc., 85, 1853–9 (2002).Google Scholar