Hostname: page-component-78c5997874-ndw9j Total loading time: 0 Render date: 2024-11-08T02:31:54.344Z Has data issue: false hasContentIssue false
  • English
  • Français

“Results on Powder Injection Molding of Ni3AI and Application to Other Intermetallic Compositions”

Published online by Cambridge University Press:  01 January 1992

Rene M. Cooper
Rene M. Cooper*
Affiliation:
Xform Incorporated, 100 North Mohawk Street, P.O. Box A9, Cohoes, N.Y. 12047
Get access

Abstract

Net shape forming processes are under development to allow affordable production of intermetallic components. Powder injection molding (PIM) may be employed for the production of complex-shaped intermetallic geometries. Proper choice of powder parameters and processing conditions can lead to the formation of fully dense structures through pressure-less sintering. In this study, Ni3Al with 0.04 wt.-% boron has been successfully injection molded and sintered to full density. A yield strength of 340 MPa, ultimate tensile strength (UTS) of 591 MPa, and 8 % elongation were attained for injection molded and sintered tensile bars. Powder characteristics and sintering behavior are given for the nickel aluminide employed in this study to highlight the powder attributes needed for injection molding. Molding parameters, debinding and sintering schedules, along with mechanical properties are presented to indicate the viability of PIM for intermetallics. This approach based on the understanding of key powder characteristics and use of the reactive synthesis powder process may be extended to the successful injection molding of other intermetallic systems.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 288: Symposium L – High-Temperature Ordered Intermetallic Alloys V , 1992 , 903
Copyright
Copyright © Materials Research Society 1995

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. German, R. M., Hens, K. F., Identification of the Effects of Key Powder characteristics on Powder Injection Molding. In-press, Proceedings of 1992 World Powder Metallurgy CongressGoogle Scholar
2. Shaw, K. G., McCoy, K. P., Trogolo, J. A., Reduction of Free Nickel During the Reaction Synthesis of Nickel Aluminide Powder. In-press, Proceedings of 1992 World Powder Metallurgy CongressGoogle Scholar
3. German, R. M., Iacocca, R. G., Powder Metallurgy Processing of Intermetallics, Chapter from Intermetallics. In-press. Editors DrsStoloff, Norm and Sikka, Vinod (Van Nostrand and Co., publishers)Google Scholar
4. Liu, C. T. et al. Initial Development of Nickel and Nickel-Iron Aluminides for Structural Uses. ORNL-6067, Martin Marietta Energy Systems, Aug 1984 Google Scholar