Hostname: page-component-586b7cd67f-dlnhk Total loading time: 0 Render date: 2024-12-01T01:46:41.081Z Has data issue: false hasContentIssue false

Preparation and Electrical Properties of (Zr, Sn)TiO4 Dielectric Thin Films by Laser Ablation

Published online by Cambridge University Press:  15 February 2011

Osamu Nakagawara
Affiliation:
Murata Manufacturing Co., Ltd., 2–26–10 Tenjin, Nagaokakyo-shi, Kyoto 617, Japan
Hitoshi Tabata
Affiliation:
Institute of Scientific and Industrial Research, Osaka University, 8–1 Mihogaoka, Ibaraki-shi, Osaka 567, Japan
Yuji Toyota
Affiliation:
Murata Manufacturing Co., Ltd., 2–26–10 Tenjin, Nagaokakyo-shi, Kyoto 617, Japan
Masato Kobayashi
Affiliation:
Murata Manufacturing Co., Ltd., 2–26–10 Tenjin, Nagaokakyo-shi, Kyoto 617, Japan
Yukio Yoshino
Affiliation:
Murata Manufacturing Co., Ltd., 2–26–10 Tenjin, Nagaokakyo-shi, Kyoto 617, Japan
Yuzo Katayama
Affiliation:
Murata Manufacturing Co., Ltd., 2–26–10 Tenjin, Nagaokakyo-shi, Kyoto 617, Japan
Tomoji Kawai
Affiliation:
Institute of Scientific and Industrial Research, Osaka University, 8–1 Mihogaoka, Ibaraki-shi, Osaka 567, Japan
Get access

Abstract

(Zr, Sn)TiO4 is considered as a promising dielectric material for microwave devices owing to the temperature stability of capacitance and excellent microwave properties. Preferential (111)-oriented (ZrSn)TiO4 thin film was obtained by an ArF laser ablation. Properties of the crystallized film were as follows; the temperature coefficient of capacitance TCC was 17.6ppm/°C at 3MHz and the dielectric constant εr, 38 in the microwave range of 1GHz˜10GHz. It has turned out that the crystallization of this material is quite effective for improving dielectrical properties. Surface morphologies were observed by atomic force microscope(AFM). Grains grew on the crystallized film at 1 μm × 1 μm size.

Type
Research Article
Copyright
Copyright © Materials Research Society 1996

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

1. Sakuma, T., Yamaguchi, S., Matsubara, S., Yamaguchi, H., and Miyasaka, Y., Appl.Phys.Lett., 57, 2431 (1990).Google Scholar
2. Takagi, H., Fujinami, N., Tamura, H., and Wakino, K., Jpn.J.Appl.Phys., 31, 3269 (1992).Google Scholar
3. Sánchez, F., Varela, M., Queralt, X., Aguiar, R., and Morenza, J.L., Appl.Phys.Lett., 61, 2228 (1992).Google Scholar
4. Bhattacharya, P., Komeda, T., Park, K., and Nishioka, Y., Jpn.J.Appl.Phys., 32, 4103 (1993).Google Scholar
5. McHale, A.E. and Roth, R.S., J.Am.Ceram.Soc., 69, 827 (1986).Google Scholar
6. Newnham, R.E., J. Am.Ceram.Soc., 50, 216 (1967).Google Scholar
7. Wakino, K., Minai, K., and Tamura, H., J.Am.Ceram. Soc., 67, 278 (1984).Google Scholar
8. Nakagawara, O., submitted to J. Appl. Phys.Google Scholar
9. Wang, D. and Oki, T., Hyomengijutu (in Japanese), 4 [8], 29 (1990).Google Scholar