Hostname: page-component-586b7cd67f-vdxz6 Total loading time: 0 Render date: 2024-11-28T13:03:53.650Z Has data issue: false hasContentIssue false

Over 20% Efficiency Mechanically Stacked Multi-Junction Solar Cells Fabricated by Advanced Bonding Using Conductive Nanoparticle Alignments

Published online by Cambridge University Press:  29 May 2013

Kikuo Makita
Affiliation:
National Institute of Advanced Industrial Science and Technology (AIST) AIST Tsukuba, Central 2, Umezono 1-1-1, Tsukuba, Ibaraki, 305-8568, JAPAN
Hidenori Mizuno
Affiliation:
National Institute of Advanced Industrial Science and Technology (AIST) AIST Tsukuba, Central 2, Umezono 1-1-1, Tsukuba, Ibaraki, 305-8568, JAPAN
Hironori Komaki
Affiliation:
National Institute of Advanced Industrial Science and Technology (AIST) AIST Tsukuba, Central 2, Umezono 1-1-1, Tsukuba, Ibaraki, 305-8568, JAPAN
Takeyoshi Sugaya
Affiliation:
National Institute of Advanced Industrial Science and Technology (AIST) AIST Tsukuba, Central 2, Umezono 1-1-1, Tsukuba, Ibaraki, 305-8568, JAPAN
Ryuji Oshima
Affiliation:
National Institute of Advanced Industrial Science and Technology (AIST) AIST Tsukuba, Central 2, Umezono 1-1-1, Tsukuba, Ibaraki, 305-8568, JAPAN
Hajime Shibata
Affiliation:
National Institute of Advanced Industrial Science and Technology (AIST) AIST Tsukuba, Central 2, Umezono 1-1-1, Tsukuba, Ibaraki, 305-8568, JAPAN
Koji Matsubara
Affiliation:
National Institute of Advanced Industrial Science and Technology (AIST) AIST Tsukuba, Central 2, Umezono 1-1-1, Tsukuba, Ibaraki, 305-8568, JAPAN
Shigeru Niki
Affiliation:
National Institute of Advanced Industrial Science and Technology (AIST) AIST Tsukuba, Central 2, Umezono 1-1-1, Tsukuba, Ibaraki, 305-8568, JAPAN
Get access

Abstract

This paper shows a new semiconductor bonding technology for mechanically stacked multi-junction solar cells. Our strategy is the combination of conductive nanoparticle alignments and the van der Waals bonding technique. With this method, reasonably low bonding resistances and minimal optical absorption losses were simultaneously attained for the use of mechanically stacked solar cells. We examined a GaInP(Eg-1.89 eV)/GaAs (Eg-1.42 eV)/InGaAsP (Eg-1.15 eV) three-junction solar cell fabricated with this bonding method. As a result, the total efficiency of 22.5% was achieved, which was in good agreement with the theoretically predicted value. These results suggested that our bonding method is highly useful to fabricate high-efficiency mechanically stacked multi-junction solar cells.

Type
Articles
Copyright
Copyright © Materials Research Society 2013 

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

Tanabe, K., Morral, A. F., Atwater, H. A., Aiken, D. J., and Wanlass, M. W., Appl. Phys. Lett., 89, 102106(2006).CrossRefGoogle Scholar
Sameshima, T., Takenezawa, J., Hasumi, M., Koida, T., Kaneko, T., Karasawa, M., and Kondo, M., Jpn. J. Appl. Phys., 50, 052301 (2011)CrossRefGoogle Scholar
Makita, K., Soya, H., Komaki, H., Sai, H., Tampo, H., Sugaya, T., Furue, S., Ishizuka, S., Yamada, A., Furukawa, A., Shibata, H., Matsubara, K., and Niki, S., Technical Digest of the 21st International Photovoltaic Science and Engineering Conference, 2B-4O-10 (2011).Google Scholar
Makita, K., Mizuno, H., Soya, H., Komaki, H., Sai, H., Tampo, H., Sugaya, T., Oshima, R., Furukawa, A., Shibata, H., Matsubara, K., and Niki, S., Proceedings of the 27th European Photovoltaic Solar Energy Conference, 78-80 (2012).Google Scholar
Mizuno, H., Makita, K., and Matsubara, K., Appl. Phys. Lett., 101, 191111(2012)CrossRefGoogle Scholar
Yablonovitch, E., Hwang, D. M., Gmitter, T. J., Florez, L. T., and Harbison, J. P., Appl. Phys. Lett., 56, 2419 (1990).CrossRefGoogle Scholar
Sze, S. M., “Physics of Semiconductor Devices”, John Wiley & Sons, 640653(1969)Google Scholar