Hostname: page-component-586b7cd67f-t7fkt Total loading time: 0 Render date: 2024-11-28T08:51:50.281Z Has data issue: false hasContentIssue false
  • English
  • Français

Nano-scale Observation of Si Trench Sidewall Surface Morphology by AFM Technology

Published online by Cambridge University Press:  01 February 2011

Reiko Hiruta ,
Hitoshi Kuribayashi  and
Ryosuke Shimizu
Reiko Hiruta
Affiliation:
[email protected], Fuji Electric Device Technology Co., Ltd., ElectronDevice Laboratory, 4-18-1 Tsukama, Matsumoto, 390-0821, Japan, +81 263 27 4918, +81 263 27 4783
Hitoshi Kuribayashi
Affiliation:
[email protected], Fuji Electric Device Technology Co., Ltd.,, Electron Device Laboratory, 4-18-1, Tsukama, Matsumoto, 390-0821, Japan
Ryosuke Shimizu
Affiliation:
[email protected], Fuji Electric Advanced Technology Co., Ltd., Material and Science Laboratory, 1, Fujimachi, Hino, 191-8502, Japan
Get access

Abstract

We have developed an atomic force microscopy (AFM) observation technique with which Si trench sidewall surface can be scanned with the tip of cantilever to investigate its nano-scale morphologies. By developing a new technique of cleaving the substrate at the center of a micron-sized trench along its longitudinal direction [011], the sidewall nano-scale morphology of the trench could be observed with the AFM technique. By comparing of cross sections of the images, we also investigated the difference between Si and carbon nanotube (CNT) tips for the AFM observations. According to the results, the CNT tip proved to show a superior signal-to-noise (S/N) ratio compared with the Si tip. The CNT tip enables us to observe the step patterns of the sidewalls of micron-sized trench structures in the various phases of hydrogen annealing.

Keywords

nanoscaleSiscanning probe microscopy (SPM)
Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 1025: Symposium B – Nanoscale Phenomena in Functional Materials by Scanning Probe Microscopy , 2007 , 1025-B07-11
Copyright
Copyright © Materials Research Society 2008

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

[1] Fujishima, N. and Salama, T. A.: IEDM Tech. Dig. (1997) 359.Google Scholar
[2] Choi, Y. K., Chang, L., Rande, P., Lee, J. S., Ha, D., Balasubramanian, S., Agarwal, A., Ameen, M., King, T. J. and Borkor, J.: IEDM Tech. Dig. (2002) 259.Google Scholar
[3] Lee, M.C. and Wu, M.C.: Proc. 18th IEEE Int. Conf. on Micro Electro Mechanical Systems (2005) 596.Google Scholar
[4] Hiruta, R., Kuribayashi, H., Shimizu, R., Sudoh, K. and Iwasaki, H.: Appl. Surf. Sci. 237 (2004) 63.Google Scholar
[5] Hiruta, R., Kuribayashi, H., Shimizu, R., Sudoh, K. and Iwasaki, H.: Appl. Surf. Sci. 252 (2006) 5279.Google Scholar
[6] Hiruta, R., Kuribayashi, H., Shimizu, R., Sudoh, K. and Iwasaki, H.: M.R.S. Symp. Proc. 958 (2007).Google Scholar
[7] Ogino, T., Hibino, H. and Homma, Y.: Appl. Surf. Sci. 117/118 (1997) 642.Google Scholar