Hostname: page-component-586b7cd67f-t7fkt Total loading time: 0 Render date: 2024-12-01T01:17:56.683Z Has data issue: false hasContentIssue false
  • English
  • Français

Micromechanical Characterization of Multilayered Steel Composites

Published online by Cambridge University Press:  26 September 2011

K. Hirashita ,
M. Matsuda ,
M. Otsu  and
K. Takashima
K. Hirashita
Affiliation:
Department of Materials Science and Engineering, Kumamoto University, 2-39-1, Kurokami, Kumamoto, Japan
M. Matsuda
Affiliation:
Department of Materials Science and Engineering, Kumamoto University, 2-39-1, Kurokami, Kumamoto, Japan
M. Otsu
Affiliation:
Department of Materials Science and Engineering, Kumamoto University, 2-39-1, Kurokami, Kumamoto, Japan
K. Takashima
Affiliation:
Department of Materials Science and Engineering, Kumamoto University, 2-39-1, Kurokami, Kumamoto, Japan
Get access

Abstract

The mechanical properties and deformation behavior of each constituent layer of multilayered steel composites were examined using microtensile testing. Three-layered integrated steels consisting of SUS420 and SPCC (cold-reduced carbon steel sheets) were fabricated by a cold-rolling process. Different heat treatment processes were used to prepare three types of specimens (as-rolled, 823K-2 min heat-treated, and 823K-500 min heat-treated), and the effect of heat treatment on their mechanical properties was investigated. In the as-rolled specimens, the average tensile strengths in the SUS420 and SPCC layers were 1063 and 606 MPa, respectively, while in the specimens heat-treated for 500 min, they were 680 and 451 MPa, respectively. The tensile strength decreased with the increase in the heat treatment time. The tensile strength of the specimens was also calculated by using the rule of mixture. For the as-rolled specimens and the 823K-2 min heat-treated specimens, the calculated value was consistent with the measured value; however, for the 823K-500 min heat-treated specimens, the calculated value was lower than the measured value. This result suggests that the necking of this layered structure was effectively obstructed by the outer ductile layer. The micromechanical characterization technique used in this study is useful not only for investigating deformation behavior but also for designing multilayered steel composites with superior mechanical properties.

Keywords

steelcompositelayered
Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 1296: Symposium O – New Methods in Steel Design—Steel Ab Initio , 2011 , mrsf10-1296-o03-05
Copyright
Copyright © Materials Research Society 2011

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. Pozuelo, M., Carreno, F., Ruano, O.A., Composites Sci. Technol. 66, 2671–2676 (2006).Google Scholar
2. Khodadado Motarjemi, A., Kocak, M., Ventzke, V., Int. J. Pres. Ves and Piping 79, 181–191 (2002).Google Scholar
3. Inoue, J., Nambu, S., Ishimoto, Y., Koseki, T., Scripta Mater. 59, 1055–1058 (2008).Google Scholar
4. Nambu, S., Michiuchi, M., Ishimoto, Y., Asakura, K., Inoue, J., Koseki, T., Scripta Mater. 60, 221–224 (2009).Google Scholar
5. Takashima, K., Higo, Y., Fatig. Fract. Eng. Mater. Str. 28, 703–710 (2005).Google Scholar
6. Kelly, A., Tyson, W.R., Journal of the Mech. Phys. 13, 329 (1965).Google Scholar