Hostname: page-component-78c5997874-v9fdk Total loading time: 0 Render date: 2024-11-08T10:13:17.583Z Has data issue: false hasContentIssue false
  • English
  • Français

Low Temperature Synthesis of Carbide Thin Films by Pulsed Laser Deposition (PLD)

Published online by Cambridge University Press:  28 February 2011

M. S. Donley ,
J. S. Zabinski ,
W. J. Sessler ,
V. J. Dyhouse ,
S. D. Walck  and
N. T. McDevitt
M. S. Donley
Affiliation:
Wright Laboratory, Materials Directorate, WL/MLBT, WPAFB, OH
J. S. Zabinski
Affiliation:
Wright Laboratory, Materials Directorate, WL/MLBT, WPAFB, OH
W. J. Sessler
Affiliation:
Wright Laboratory, Materials Directorate, WL/MLBT, WPAFB, OH
V. J. Dyhouse
Affiliation:
Research Institute, University of Dayton, Dayton, OH
S. D. Walck
Affiliation:
SYSTRAN Corp., Linden Ave, Dayton, OH
N. T. McDevitt
Affiliation:
RAMSPEC Research, 4399 E. Mohave Dr., Dayton, OH.
Get access

Abstract

Thin films of titanium carbide (TiC) and boron carbide (B4C) were grown by excimer pulsed laser deposition (PLD) at room temperature (RT) and 300°C. Films were deposited using the output of an excimer laser operating with KrF gas (γ = 248 nm, 15 ns pulse duration) to ablate hot-pressed targets. Film chemistry, morphology, and crystallinity were investigated. Stoichiometric, crystalline TiC films were grown on 440C stainless steel and NaCl substrates at room temperature and at 300°C. The films grown on NaCl were nanocrystalline, cubic TiC, with a grain size ranging between 2 and 10 nm in diameter. Boron carbide films were grown on silicon {100} substrates at room temperature and at 300°C. Film chemistry and stoichiometry duplicated that of the B4C target, which contained B4C and a mixed C-B-O-N binder phase. SEM analysis indicated that the morphology of the films was uniform, non-porous, and fine-grained. The films exhibited good adhesion and wear resistance, based on friction and wear data collected with a ball-on-disc tribometer.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 235: Symposium A – Phase Formation and Modification by Beam-Solid Interactions , 1991 , 873
Copyright
Copyright © Materials Research Society 1992

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. Spalvins, T., “Microstructural and Wear Properties of Sputtered Carbides and Silicides”, Wear of Materials 1977. ASME, 1977.Google Scholar
2. Pope, L.E. and Panitz, J.K.G., Surface and Coatings Technology, 36 (1988) 341.Google Scholar
3. Kisly, P.S. in Science of Hard Materials, ed. by Almond, E.A., Brookes, C.A., and Warren, R., Institute of Physisc Conference Series Number 75 (1984), Adam Hilger Ltd., Bristol, U.K., pp 107–136.Google Scholar
4. Georgiev, G., Feschiev, N., Popov, D., and Uzuuov, Z., Vacuum 36. 595(1986).Google Scholar
5. Eizenberg, M. and Murarka, S.P., J. Appl. Phys. 54. 3190(1983).Google Scholar
6. Sundgren, J.E., Johansson, B.-O., Hentzell, H.T.G., and Karlsson, S.-E., Thin Solid Films 105, 385(1983).Google Scholar
7. Donley, M.S., Murray, P.T., Barber, S.A., and Haas, T.W., Surface and Coatings Technology, 36, 329 (1988).Google Scholar
8. Donley, M.S., McDevitt, N.T., Haas, T.W., Murray, P.T., and Grant, J.T., Thin Solid Films 168. 335(1989).CrossRefGoogle Scholar
9. Zabinski, J.S., Donley, M.S., Dyhouse, V.J., and McDevitt, N.T., submitted to Thin Solid Films 20 July 1991.Google Scholar
10. Ihara, Hideo, Kumashiro, Yukinobu, Itoh, Akiro, and Meada, Kogoro, Japan J. Appl. Phys. 12, 1462 (1973).CrossRefGoogle Scholar
11. Rist, O., Murrav, P.T.. Materials Letters. 10(7.8) 323 (1991)CrossRefGoogle Scholar