Hostname: page-component-586b7cd67f-gb8f7 Total loading time: 0 Render date: 2024-11-28T09:59:46.512Z Has data issue: false hasContentIssue false
  • English
  • Français

Investigation of Using Contact and Non-contact Printing Technologies For Organic Transistor Fabrication

Published online by Cambridge University Press:  01 February 2011

Jie Zhang ,
Paul Brazis ,
A. Roy Chowdhuri ,
John Szczech  and
Dan Gamota
Jie Zhang*
Affiliation:
Motorola Advanced Technology Center Schaumburg, IL
Paul Brazis
Affiliation:
Motorola Advanced Technology Center Schaumburg, IL
A. Roy Chowdhuri
Affiliation:
Motorola Advanced Technology Center Schaumburg, IL
John Szczech
Affiliation:
Motorola Advanced Technology Center Schaumburg, IL
Dan Gamota
Affiliation:
Motorola Advanced Technology Center Schaumburg, IL
*
*For correspondence: [email protected] or 847.538.6847
Get access

Abstract

Low cost, high volume manufacturing processes are envisioned for solution processable organic semiconductor integrated circuits (IC) fabrication. The organic IC may be the low cost solution for driving electronic devices, i.e. smart cards, RFID tags, flexible displays, personal area networks, and body area networks. This study investigated the manufacturability of organic electronics (organic field effect transistors (OFETs), organic light emitting diodes (OLEDs), etc.) using commercially available printing technologies and materials systems qualified for use in microelectronic products. The evaluated contact printing technologies were pad printing and screen-printing; the non-contact printing technologies were ink jetting and micro dispensing. The material system selection for transistor structures and active layers was based on printing technology requirements and commercial availability. The materials were polymer thick film conductors and insulators, conductive nano-particle suspensions, and organic polymer systems. A series of material property characterization and printing process development studies were conducted. Several OFET designs were created and functional all printed organic transistors were demonstrated. The device electrical performance was characterized.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 725: Symposium P – Organic and Polymeric Materials and Devices-Optical, Electrical, and Optoelectronic Properties , 2002 , P6.3
Copyright
Copyright © Materials Research Society 2002

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

1. Huitema, H. Gelinck, G. Putten, J. van der, Kuijk, K. Hart, C. Cantatore, E. Herwig, P. Breemen, A. van, Leeuw, D. de, Nature, 414, p. 599, 2001.Google Scholar
2. Jackson, T. Lin, Y. Gundlach, D. and Klauk, H. IEEE J. of Selected Topics in Quan. Elec. 4 (1), p. 100, 1998.Google Scholar
3. Broillier, B. IMAPS ATW, March 8-10, 2002.Google Scholar
4. Kipphan, H. Handbook of Printing Media, Springer, 2001.Google Scholar
5. Lawrence, D. Sarnecki, G. and Fein, M. IMAPS ATW, March 8-10, 2002.Google Scholar
6.Sun Chemicals website www.sunchemical.com.Google Scholar
7. Zhang, J. Shmagin, I. Skinner, J. Szczech, J. and Gamota, D. MRS2000 Spring, Symposium V.Google Scholar
8.T. Jackson research group website http://jerg.ee.psu.eduGoogle Scholar
9. Klauk, H. Gundlach, D. Nichols, J. and Jackson, T. IEEE TRANS. ON ELEC. DEVICES, VOL. 46, NO. 6, JUNE 1999.Google Scholar
10. Horowitz, G. Advanced Materials, vol. 10, no. 5, pp. 365–377, 1998.Google Scholar
11. Bao, Z. Dodabalapur, A. and Lovinger, A. J. Appl. Phys. Lett. 69 (26), p 4108, 23 December 1996.Google Scholar