Hostname: page-component-586b7cd67f-rcrh6 Total loading time: 0 Render date: 2024-11-24T12:07:42.098Z Has data issue: false hasContentIssue false

The effects of Pulsed Green Laser Annealing for Carbon NanoWalls (CNWs)

Published online by Cambridge University Press:  10 April 2013

Norihito Kawaguchi
Affiliation:
Advanced Applied Science Dept., Research Laboratory, IHI Corporation, 1-Shin-Nakahara-Cho, Isogo-ku, Yokohama 235-8501, Japan
Akihiko Yoshimura
Affiliation:
Mechanical Technology Dept., Products Development Center, IHI Corporation, 1-Shin-Nakahara-Cho, Isogo-ku, Yokohama 235-8501, Japan
Get access

Abstract

The effects of the pulsed green laser annealing at ambient nitrogen for two different heights-CNWs grown on silicon substrate were investigated on the crystallinity and morphology using Raman spectroscopy, SEM, TEM and XPS. For the 1μm height-CNWs, the peak intensity of D-band spectra decreased as the laser energy density increased up to 1.3Jcm-2, ID/IG ratio decreased from 2.5 to 0.7. The crystallinity of CNWs was improved by the laser irradiation. For the 1μm height-CNWs irradiated above 1.5Jcm-2, the height of CNWs decreased gradually as the laser energy density increased, it was clarified that the surfaces of CNWs were vaporized by the laser irradiation. For the 20μm height-CNWs, the peak intensity of D band spectra also decreased until the laser energy density increased up to 0.8Jcm-2, ID/IG ratio decreased from 1.6 to 0.5. From the TEM observation of CNWs irradiated at 0.8 Jcm-2, it was confirmed that the laser irradiation changed CNWs to be highly oriented crystal structure. However above 0.8Jcm-2, the crystallinity was deteriorated due to the vaporization of CNWs as the same as the 1μm height-CNWs. The pulsed green laser annealing is effective to improve the crystallinity of CNWs on optimal laser energy density for both height-CNWs, the higher laser energy densities vaporized the CNWs and changed the morphology and crystallinity of CNWs.

Type
Articles
Copyright
Copyright © Materials Research Society 2013

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

Novoselov, K. S. et al. ., Science 306, 666(2004)CrossRefGoogle Scholar
Iijima, S., Nature 354, 56 (1991)CrossRefGoogle Scholar
Kurita, S. et al. ., J. Appl. Phys. 97, 104320(2005)CrossRefGoogle Scholar
Wu, Yihong et al. ., J. Mater. Chem., 14, 473(2004 CrossRefGoogle Scholar
Seog Chul Shin et al. ., J. Appl. Phys.110, 104308(2011)Google Scholar
Kobayashi, K. et al. ., J. Appl. Phys. 101, 094306(2007)CrossRefGoogle Scholar
Gong, Q.-M. et al. ., Materials Research Bulletin 42, 477(2007)Google Scholar
Castillejos, E. et al. ., J. of Alloys and Compounds 536S, S462 (2012)Google Scholar
Zhao, J. et al. ., Diamond & Related Materials 25, 27(2012)CrossRefGoogle Scholar