Hostname: page-component-586b7cd67f-r5fsc Total loading time: 0 Render date: 2024-11-28T13:48:58.622Z Has data issue: false hasContentIssue false
  • English
  • Français

Characterization of chemical and sensoric properties of ion-beam modified polyethersulfone layers

Published online by Cambridge University Press:  21 March 2011

Karin Sahre ,
Klaus-Jochen Eichhorn ,
Frank Simon ,
Margaritha Guenther ,
Gunnar Suchaneck  and
Gerald Gerlach
Karin Sahre
Affiliation:
Institute of Polymer Research Dresden, Hohe Strasse 6, 01069 Dresden, GERMANY
Klaus-Jochen Eichhorn
Affiliation:
Institute of Polymer Research Dresden, Hohe Strasse 6, 01069 Dresden, GERMANY
Frank Simon
Affiliation:
Institute of Polymer Research Dresden, Hohe Strasse 6, 01069 Dresden, GERMANY
Margaritha Guenther
Affiliation:
Dresden University of Technology, Institute for Solid State Electronics, 01062 Dresden, GERMANY
Gunnar Suchaneck
Affiliation:
Dresden University of Technology, Institute for Solid State Electronics, 01062 Dresden, GERMANY
Gerald Gerlach
Affiliation:
Dresden University of Technology, Institute for Solid State Electronics, 01062 Dresden, GERMANY
Get access

Abstract

Thin polyethersulfone (PES) films were irradiated with boron ions at doses between 1013-1016B+/cm2 and energies of 50, 130 and 180 keV. The induced changes of structural and optical properties were studied in detail. The influence on sensoric properties (moisture uptake, conductivity) was also in the focus of interest. The results of vibrational spectroscopy and X-ray photoelectron spectroscopy (XPS) indicate that in dependence on dose and energy of implanted boron ions the sulfone bonds are destroyed, and carbon-rich, amorphous and graphite-like structures are formed. This structural changes cause an increase of the conductivity of the surface films to a value of 10−8 Ω−1 at a dose of 1016 B+/cm2 from an as- prepared value of 10−15 Ω −1 and an increase of the saturation concentration during the moisture uptake.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 672: Symposium O – Mechanisms of Surface and Microstructure Evolution in Deposited Films and Film Structures , 2001 , O88.1
Copyright
Copyright © Materials Research Society 2001

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. Buchhold, R., Nakladal, A., Gerlach, G., Sahre, K., Müller, M., Eichhorn, K.-J., Herold, M., and , Gauglitz, J. Electrochem. Soc., 145, 4012 (1998).Google Scholar
2. Buchhold, R., Bimorphe Gassensoren, Dresden Univ. Press, Dresden, and Munich (1999).Google Scholar
3.Standard IEC 93: Methods of test for insulating materials for electrical purposes; Volume resistivity and surface resistivity of solid electrical insulating materials (1980).Google Scholar
4. Sahre, K., Eichhorn, K.-J., Simon, F., Pleul, D., Janke, A., Gerlach, G., accepted to publication in Surf. & Coat. Techn. Google Scholar
5. Ziegler, J.F., Biersack, J. P., and Littmark, U.: The Stopping and Range of Ions in Solids, Pergamon Press, New York (1985).Google Scholar
6. Biersack, J.P., and Haggmark, L., Nucl. Instr. and Meth., 174, 257 (1980). See also: http://www.research.ibm.com/ionbeams/SRIM/SRIMINTR.htm.Google Scholar
7. Kast, W.: Adsorption aus der Gasphase, VCH, Weinheim (1988).Google Scholar
8. Lee, E.H., In: Ghosh, M., and Mittal, K. (eds.), Polyimides, Marcel Dekker, New York, 471 (1996).Google Scholar
9. Wang, Y., Monite, S. S. and Bridwel, L. B., J. Mater. Res., 8, 388 (1993).Google Scholar