Hostname: page-component-586b7cd67f-2plfb Total loading time: 0 Render date: 2024-11-30T23:57:15.986Z Has data issue: false hasContentIssue false
  • English
  • Français

Recent Progress in Amorphous Silicon Solar Cells and Their Technologies

Published online by Cambridge University Press:  29 November 2013

Y. Hamakawa ,
W. Ma  and
H. Okamoto
Get access

Extract

A big barrier impeding the expansion of large-scale power generation by photovoltaic (PV) systems was the high price of solar cell modules, which was more than $50/Wp (peak watts) by 1974. Therefore, cost reduction of solar cells is of prime importance. To achieve this objective, tremendous R&D efforts have been made over the past ten years in a wide variety of technical fields, from solar cell materials, cell structure, and mass production processes to photovoltaic systems. As a result, more than an order of magnitude in cost reduction has been achieved, and the module cost has come down to less than $5/Wp in a firm bid for the large-scale market. Two phases of technological innovation can be identified. The first innovation in progress is based on low-cost polycrystalline technologies applicable to well-developed single-crystalline silicon solar cell fabrication processes. The second remarkable innovation is a-Si:H (hydrogenated amorphous silicon) technology, which we will discuss.

We open our discussion with a brief overview of the present status of a-Si solar cell R&D efforts, with some new insights in device physics. Next, we discuss some new approaches and key technologies for improving solar cell efficiency with stabilized performance using new materials such as a-SiC:H (amorphous silicon carbide), μc-SiC:H (microcrystalline silicon carbide), and a-SiGe:H (amorphous silicon germanium). Also, the progress of conversion efficiency in various types of amorphous silicon solar cells is surveyed and summarized.

Type
Materials for Photovoltaics
Information
MRS Bulletin , Volume 18 , Issue 10 , October 1993 , pp. 38 - 41
Copyright
Copyright © Materials Research Society 1993

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

1.Hamakawa, Y. and Tawada, Y., Int. J. Sol. En. 1 (1982) p. 251.Google Scholar
2.Tawada, Y., Okamoto, H., and Hamakawa, Y., Sol. En. Mater. 6 (1982) p. 299.CrossRefGoogle Scholar
3.Yang, J., Ross, R., Mohr, R., and Fournier, J.P., in Amorphous Semiconductor Technology, edited by Adler, D., Hamakawa, Y., and Madan, A. (Mater. Res. Soc. Symp. Proc. 70, Pittsburgh, PA, 1986) p. 475.Google Scholar
4.Tsuda, S., Nakamura, N., Watanabe, K., Takahama, T., Nishiwaki, H., Ohnishi, M., and Kuwano, Y., Sol. Cells 9 (1–2) (1983) p. 25.CrossRefGoogle Scholar
5. For example, Hamakawa, Y., Amorphous Semi-conductor-Device & Technology, JARECT Series-22 (Ohm-Sha & North-Holland, Tokyo and Amsterdam, 1983) p. 252.Google Scholar
6.Shimizu, I., J. Non-Cryst. Solids 77 & 78 (1985) p. 1363.CrossRefGoogle Scholar
7.Gunag-Pu, W., Okamoto, H., and Hamakawa, Y., Jpn. J. Appl. Phys. 24 (1985) p. 1105.CrossRefGoogle Scholar
8.Nakano, S., Fukatsu, T., Takeuchi, M., Nakajima, S., and Kawano, Y., in Proc. 3rd Sensor Symposium (Tsukuba, 1983) p. 97.Google Scholar
9.Nakata, Y., Sannomiya, H., Nomoto, K., Yokota, A., Itoh, M., and Tsuji, T., Optoelectronics-Device & Tech. 5 (2) (1990) p. 209.Google Scholar
10. See, for example, Hamakawa, Y. and Okamoto, H., Chapter I, “a-Si Solar Cells,” in Advances in Solar Energy 5, edited by Boer, K. (Plenum, New York, 1989) p. 98.Google Scholar
11.Hamakawa, Y., Hattori, K., and Okamoto, H., in a-Si Solar Cell Contractors Meeting Report [in Japanese], Sunshine Project, MITI (May, 1990) p. 34.Google Scholar
12.Shirai, H., Das, D., Hanna, J., and Shimizu, I., in Tech Digest of PVSEC-5 (Kyoto, 1990) p. 59.Google Scholar
13.Tawada, Y. and Yamagishi, H., in a-Si Solar Cell Contractors Meeting Report [in Japanese], Sunshine Project, MITI, (May, 1990) p. 60.Google Scholar
14. For example, Tsuda, S., Tatui, H., Matsuyama, T., Haku, H., Watanabe, K., Nakashima, Y., Nakano, S., and Kuwano, Y., in Proc. 2nd Int. Photovoltaic Science and Engineering Conf., Beijing (1986) p. 409.Google Scholar
15.Hamakawa, Y., Matsumoto, Y., Chong-Yang, X., Okuyama, M., Takakura, H., and Okamoto, H., in Amorphous Semiconductor Technology, edited by Adler, D., Hamakawa, Y., and Madar, A. (Mater. Res. Soc. Symp. Proc. 70, Pittsburgh, PA, 1986) p. 481.Google Scholar
16.Ichikawa, Y., Fujikake, S., Katayama, T., Saito, S., Ota, H., Yoshida, T., Ihara, T., and Sakai, H., in Proc. 23rd IEEE Photovoltaics Specialists Conf. (IEEE, New York, 1993); Session OP-4, to be published.Google Scholar
17.Nakata, Y., Yokota, A., Sannomiya, H., and Tsuji, T., in Amorphous Silicon Technology, edited by Taylor, C., Hamakawa, Y., LeComber, P., Madan, A., and Thompson, M. (Mater. Res. Soc. Symp. Proc. 219, Pittsburgh, PA, 1991) p. 433.Google Scholar
18.Hamakawa, Y., Sol. En. Mater. 23 (1991) p. 139.CrossRefGoogle Scholar
19.Ma, W., Horiuchi, T., Yoshimi, M., Hattori, K., Okamoto, H., and Hamakawa, Y., in Proc. 23rd IEEE Photovoltaics Specialists Conf. (IEEE, New York, 1993); Session 4A-5, to be published.Google Scholar
20.Yamaguchi, J., Business Jpn. 35 (9) (1990) p. 60.Google Scholar
21.Kuwano, Y., Business Jpn. 36 (9) (1991) p. 58.Google Scholar