Hostname: page-component-cd9895bd7-hc48f Total loading time: 0 Render date: 2024-12-25T03:29:18.765Z Has data issue: false hasContentIssue false
  • English
  • Français

PE-MOCVD of Dielectric Thin Films: Challenges and Opportunities

Published online by Cambridge University Press:  29 November 2013

Sandwip K. Dey  and
Prasad V. Alluri
Get access

Extract

The current trend in electronic-systems technology is to produce compact, lighter, low-power-dissipating, affordable, reliable, and mobile information systems. These factors favor the augmentation of interface systems that sense, source, store, display, and actuate with artificial-intelligence strategies. Herein lies the opportunity to introduce novel technologies based on integrated multi-component oxide (e.g., titanates, niobates, and tantalates) films into usable systems. In particular the oxygen octahedra class of materials (e.g., (Ba,Sr)TiO3 or BST, Pb(Zr,Ti)O3 or PZT, layered SrBi2Ta2O9 or SBT, and polytitanates) that exhibit high permittivities; large electromechanical-coupling coefficients; and pyroelectric, electro-optic, and ferroelectric effects are of interest. They are being evaluated, due to growing demand for compatibility with integrated-circuit (IC) technology, for a variety of applications. These include nonvolatile memories, ultralargescale-integration (ULSI) dynamic random-access memories (DRAMs), decoupling capacitors, piezoelectric sensors and actuators, pyroelectric detectors, and neural network components. Moreover in high-performance multichip-module (MCM) technology, there remains a vital need for the replacement of discrete passive devices, which occupy valuable real estate, by embedded ones. These high-density interconnect structures will play a significant role in nondigital electronic modules including mixed-mode circuits, power conversion and conditioning, microwave transmit/receive (T/R), and optoelectronics. Table I specifically illustrates some electronic applications along with their estimated requirements.

Type
Electroceramic Thin Films Part I: Processing
Information
MRS Bulletin , Volume 21 , Issue 6 , June 1996 , pp. 44 - 48
Copyright
Copyright © Materials Research Society 1996

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

1.Dey, S.K., in Ferroelectric Thin Films: Synthesis and Basic Properties, vol. 10, edited by Paz de Araujo, C., Scott, J.F., and Taylor, G.W. (Gordon and Breach, New York, 1996).Google Scholar
2.Yoshida, M., Yamaguchi, H., Sakuma, T., Miyasaka, Y., Lesaicherre, P-Y., and Ishitani, A., J. Electrochem. Soc. 142 (1995) p. 244.CrossRefGoogle Scholar
3.Van Buskirk, P.C., Roeder, J.F., and Bilodeau, S., Integrated Ferroelectrics 10 (1995) p. 9.CrossRefGoogle Scholar
4.Manos, D.M. and Dylla, H.F., in Plasma Etching, edited by Manos, D.M. and Flamm, D.L. (Academic Press, New York, 1989).Google Scholar
5.MRS Bulletin XX (5) (1995).Google Scholar
6.Cale, T.S., in Modeling and Simulation of Thin-Film Processing, edited by Srolovitz, D.J., Volkert, C.A., Fluss, M.J., and Kee, R.J. (Mater. Res. Soc. Symp. Proc. 389, Pittsburgh, 1995) p. 95.Google Scholar
7.Cale, T.S., Jain, M.K., and Raupp, G.B., J. Electrochem. Soc. 137 (1990) p. 1526.CrossRefGoogle Scholar