Hostname: page-component-586b7cd67f-rcrh6 Total loading time: 0 Render date: 2024-11-24T15:31:05.924Z Has data issue: false hasContentIssue false
  • English
  • Français

Computational Fluid Dynamics Modeling of Fabric Systems for Intelligent Garment Design

Published online by Cambridge University Press:  31 January 2011

Jim Barry ,
Roger Hill ,
Paul Brasser ,
Michal Sobera ,
Chris Kleijn  and
Phil Gibson
Get access

Abstract

Protective clothing provides laboratory and hazardous-materials workers, firefighters, military personnel, and others with the means to control their exposure to chemicals, biological materials, and heat sources. Depending on the specific application, the textile materials used in protective clothing must provide high performance in a number of areas, for example, impermeability to hazardous chemicals, breathability, light weight, low cost, and durability. Models based on computational fluid dynamics have been developed to predict the performance of protective clothing materials. Such models complement testing by enabling property data from laboratory materials tests to be used in predictions of the performance of integrated multilayer garments under varying environmental conditions.

Keywords

advanced fabricscomputational fluid dynamics (CFD)computer simulationdiffusionprotective textiles
Type
Research Article
Information
MRS Bulletin , Volume 28 , Issue 8: Advanced Fabrics , August 2003 , pp. 568 - 573
Copyright
Copyright © Materials Research Society 2003

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

1.Gibson, P.W., Governing Equations for Multiphase Heat and Mass Transfer in Hygroscopic Porous Media with Applications to Clothing Materials, Technical Report Natick/TR-95/004 (U.S. Army Natick Research, Development, and Engineering Center, Natick, MA, 1994).Google Scholar
2.Gibson, P.W., Multiphase Heat and Mass Transfer through Hygroscopic Porous Media with Applications to Clothing Materials, Technical Report Natick/TR-97/005 (U.S. Army Natick Research, Development, and Engineering Center, Natick, MA, 1996).Google Scholar
3.Whitaker, S., in Advances in Heat Transfer, Vol. 13, edited by Hartnett, J. (Academic Press, New York, 1977) p. 119.Google Scholar
4.Whitaker, S., in Advances in Heat Transfer, Vol. 31, edited by Hartnett, J. (Academic Press, New York, 1998) p. 1.Google Scholar
5.Gibson, P.W. and Charmchi, M., J. Appl. Polym. Sci. 64 (1997) p. 493.Google Scholar
6.Brasser, P. and Kaajik, J., Modelling of the Protective Performance of NBC-Clothing 1: Profile between Clothing and Skin, Technical Report PML 1998-A107 (TNO Prins Maurits Laboratory, Rijswik, the Netherlands, June 1999)Google Scholar
7.Fedele, P., Bergman, W., McCallen, R., and Sutton, S., in Proc. 1986 U.S. Army Science Conf., Vol. I (U.S. Army Science Board, Washington, DC, 1986) p. 279.Google Scholar
8.Hanley, J. and Fedele, P., in Proc. 1987 U.S. Army Chemical Research, Development, and Engineering Center Scientific Conf. on Chemical Defense Research (U.S. Army Chemical Research, Development, and Engineering Center, Edgewood, MD, 1988) p. 444.Google Scholar
9.Hanley, J., VanOsdell, D., and Fedele, P., in Proc. 1988 U.S. Army Chemical Research, Development, and Engineering Center Scientific Conf. on Chemical Defense Research (U.S. Army Chemical Research, Development, and Engineering Center, Edgewood, MD, 1989) p. 347.Google Scholar
10.Kind, R. and Broughton, C., Textile Res. J. 70 (2000) p. 171.Google Scholar
11.Kind, R., Jenkins, J., and Seddigh, F., Cold Regions Sci. Technol. 20 (1991) p. 39.Google Scholar
12.Sobera, M.P., Kleijn, C.R., Brasser, P., and Van den Akker, H.E.A., in Proc. Computational Technologies for Fluid/Thermal/Structural/Chemical Systems with Industrial Applications, edited by Kleijn, C.R. and Kawano, S., ASME PVP Vol. 448–1 (American Society of Mechanical Engineers, Vancouver, Canada, 2002) p. 249.Google Scholar
13.Sobera, M.P., Kleijn, C.R., Brasser, P., and Van den Akker, H.E.A., “Convective Heat and Mass Transfer to a Cylinder Sheathed by a Porous Layer” (unpublished manuscript).Google Scholar
14.Barry, J.J. and Hill, R.W., “Computational Modeling of Protective Clothing,” presented at the International Nonwoven Technical Conference (INTC) 2002, Atlanta, GA, September 24 – 26, 2002, preprint.Google Scholar
15.Barry, J.J. and Hill, R.W., in Proc. Fall 2002 Fiber Society Annual Technical Conf. [CD-ROM] (The Fiber Society, Raleigh, NC, 2002) p. 124.Google Scholar