Hostname: page-component-586b7cd67f-gb8f7 Total loading time: 0 Render date: 2024-11-24T12:30:18.344Z Has data issue: false hasContentIssue false
  • English
  • Français

Synthesis and characterization of TiO2 using sol-gel method at different annealing temperatures

Published online by Cambridge University Press:  26 February 2018

H. Elbushra ,
M. Ahmed ,
H. Wardi  and
N. Eassa
H. Elbushra*
Affiliation:
Department of Physics, Al Neelain University, PO Box12702.Khartoum, Sudan
M. Ahmed
Affiliation:
Physics Department, National Ribat University, Khartoum, Sudan
H. Wardi
Affiliation:
Physics Department, Omdurman Alahlia University, Khartoum, Sudan
N. Eassa
Affiliation:
Department of Physics, Al Neelain University, PO Box12702.Khartoum, Sudan
*
*E-mail: [email protected](corresponding author)
Get access

Abstract

This article aims to prepare high quality of TiO2 powder and study the effect of annealing temperature. TiO2 particles were synthesized by sol-gel method using titanium tetra chloride (TiCl4) as a precursor. The dried gel was annealed at temperatures of 500oC, 600oC, 700°C and 800 °C each for 4 hours. The as-prepared samples were further characterized using X-Ray diffraction (XRD), Scanning electron microscope (SEM), Energy dispersive X-ray Fluorescence spectrometer (EDX), XRD showed anatase structure after annealing and its diffraction scattering intensity indicated the improvement in the crystal structure quality of TiO2 as the temperature increases. SEM micrographs showed a randomly distributed and non-uniform cluster of TiO2 that has a size increase with annealing temperatures. EDX indicated stoichiometric chemical composition between Ti and O enhanced by annealing.

Keywords

annealingTisol-gel
Type
Articles
Information
MRS Advances , Volume 3 , Issue 42-43: African Materials Research Society 2017 , 2018 , pp. 2527 - 2535
Copyright
Copyright © Materials Research Society 2018 

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

Reference:

Xu, H., Wang, X., and Zhang, L., “Selective preparation of nanorods and micro-octahedrons of Fe 2 O 3 and their catalytic performances for thermal decomposition of ammonium perchlorate,” vol. 185, pp. 176–180, 2008.Google Scholar
Wang, J., Mao, B., Gole, L., and Burda, C., “Visible-light-driven reversible and switchable hydrophobic to hydrophilic nitrogen-doped titania surfaces: correlation with photocatalysis,” 2010.Google Scholar
Hsien, Y., Chang, C., Chen, Y., and Cheng, S., “Photodegradation of aromatic pollutants in water over TiO 2 supported on molecular sieves,” vol. 31, pp. 241–249, 2001.Google Scholar
Byranvand, M. M., Kharat, A. N., Fatholahi, L., and Beiranvand, Z. M., “A Review on Synthesis of Nano-TiO 2 via Different Methods,” vol. 3, pp. 1–9, 2013.Google Scholar
Harizanov, O. and Harizanova, A., “Development and investigation of sol gel solutions for the formation of TiO coatings,” vol. 63, pp. 185–195, 2000.Google Scholar
Thangavelu, K., Annamalai, R., and Arulnandhi, D., “Preparation and Characterization of Nanosized Tio 2 Powder by Sol-Gel Precipitation Route,” vol. 3, no. 1, pp. 636–639, 2013.Google Scholar
Hosseini, Z. S., Shasti, M., Sani, S. R., and Mortezaali, A., “Photo-detector diode based on thermally oxidized TiO 2 nanostructures / p-Si heterojunction,” vol. 14503, 2016.Google Scholar
Roy, P., Berger, S., and Schmuki, P., “TiO 2 Nanotubes: Synthesis and Applications Angewandte,” pp. 2904–2939, 2011.Google Scholar
Jameel, Z. N., “Synthesis of TiO 2 Nan particles by Using Sol-Gel Method and its Applications as Antibacterial Agents,” vol. 32, no. 3, pp. 418–426, 2014.Google Scholar
Greene, D., Serrano-garcia, R., Govan, J., and Gun, Y. K., “Synthesis Characterization and Photocatalytic Studies of Cobalt Ferrite-Silica-Titania Nanocomposites,” pp. 331–343, 2014.Google Scholar
Haider, A. J., Materials, A., and Materials, A., “Synthesis and Characterization of TiO 2 Nanoparticles via Sol- Gel Method by Pulse Laser Ablation,” vol. 33, no. 5, pp. 3–4, 2015.Google Scholar
Wei, C. and Chang, C., “Polycrystalline TiO 2 Thin Films with Different Thicknesses Deposited on Unheated Substrates Using RF Magnetron Sputtering,” vol. 52, no. 3, pp. 554–559, 2011.Google Scholar
Li, W., Ni, C., Lin, H., Huang, C. P., and Shah, S. I., “Size dependence of thermal stability of TiO2 nanoparticles,” J. Appl. Phys., vol. 96, no. 11, pp. 6663–6668, 2004.CrossRefGoogle Scholar
Jagtap, N., Bhagwat, M., Awati, P., and Ramaswamy, V., “Characterization of nanocrystalline anatase titania: An in situ HTXRD study,” Thermochim. Acta, vol. 427, no. 1–2, pp. 37–41, 2005.CrossRefGoogle Scholar
Hayle, S. T. and Gonfa, G. G., “Synthesis and characterization of titanium oxide nanomaterials using sol-gel method,” vol. 2, no. 1, pp. 1–7, 2014.Google Scholar