Hostname: page-component-586b7cd67f-t7czq Total loading time: 0 Render date: 2024-11-28T16:18:00.680Z Has data issue: false hasContentIssue false
  • English
  • Français

A Stress Relief Method to Control Warping of Focused Ion Beam Prepared Membranes for Transmission Electron Microscopy

Published online by Cambridge University Press:  02 July 2020

B.B. Rossie ,
F.A. Stevie ,
T.L. Shofner ,
S.R. Brown  and
R.B. Irwin
B.B. Rossie
Affiliation:
Lucent Technologies, 9333 S. John Young Pkwy., Orlando, Florida, 32819
F.A. Stevie
Affiliation:
Lucent Technologies, 9333 S. John Young Pkwy., Orlando, Florida, 32819
T.L. Shofner
Affiliation:
Lucent Technologies, 9333 S. John Young Pkwy., Orlando, Florida, 32819
S.R. Brown
Affiliation:
Lucent Technologies, 9333 S. John Young Pkwy., Orlando, Florida, 32819
R.B. Irwin
Affiliation:
Lucent Technologies, 9333 S. John Young Pkwy., Orlando, Florida, 32819
Get access

Extract

The continued decrease in microelectronic feature dimensions has led to a reliance on the focused ion beam (FIB) for site-specific transmission electron microscopy (TEM) specimen preparation. To maximize the capabilities of the FIB, methods must be developed to consistently produce specimens thin enough to generate TEM lattice images. The limiting factor in producing quality TEM specimens by either the traditional or lift-out method is the final thickness of the specimen.

The FIB is used to prepare TEM specimens by removing the bulk material that surrounds a desired feature by sputtering with a focused gallium ion beam. Successively lower beam currents are used to sputter away material until an electron transparent membrane (-0.2 μm) containing the desired feature remains. For a 300 keV TEM, lattice imaging of silicon requires additional membrane thinning to less than 0.05 μm.

The loss of rigidity during the thinning process makes the membrane highly prone to deformation due to residual stresses, linear expansion, and ion beam interaction.

Type
Applications and Developments of Focused Ion Beams
Information
Microscopy and Microanalysis , Volume 6 , Issue S2: Proceedings: Microscopy & Microanalysis 2000, Microscopy Society of America 58th Annual Meeting, Microbeam Analysis Society 34th Annual Meeting, Microscopical Society of Canada/Societe de Microscopie de Canada 27th Annual Meeting, Philadelphia, Pennsylvania August 13-17, 2000 , August 2000 , pp. 532 - 533
Copyright
Copyright © Microscopy Society of America

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

References:

1.Stevie, F.A., et al., Surf, and Inter. Anal. 23 (1995) 61.CrossRefGoogle Scholar
2.Giannuzzi, L.A., et al., Mater. Res. Soc. Symp. Proc. 480 (1997) 19CrossRefGoogle Scholar
3.Giannuzzi, L.A., et al., Microstructural Science 26 (1998) 249Google Scholar
4.Walker, J. F., Inst. Phys. Conf. 157 (1997) 469.Google Scholar
5.Walker, J. F., Electron Microscopy (1998) 555.Google Scholar