Plasma Cleaning and Its Applications for Electron Microscopy

Thomas C. Isabell; Paul E. Fischione; Catherine O'Keefe; Murat U. Guruz; Vinayak P. Dravid

doi:10.1017/S1431927699000094

Abstract

The effectiveness of applying a high-frequency, low-energy, reactive gas plasma for the removal of hydrocarbon contamination from specimens and components for electron microscopy has been investigated with a variety of analytical techniques. Transmission electron microscopy (TEM) analysis of specimens that have been plasma cleaned shows an elimination of the carbonaceous contamination from the specimen. With extended cleaning times the removal of existing carbon contamination debris due to previously conducted microanalysis is shown. Following plasma cleaning, specimens may be examined in the electron microscope for several hours without exhibiting evidence of recontamination. The effectiveness of plasma cleaning is not limited to applications for TEM specimens. Scanning electron microscopy (SEM) specimens that have been plasma cleaned likewise show an elimination of carbonaceous contamination. Furthermore, other electron microscopy parts and accessories, such as aperture strips, specimen clamping rings, and Wehnelts, among others, can benefit from plasma cleaning.

Crossref Citations

This article has been cited by the following publications. This list is generated based on data provided by Crossref.

Cousens, D. R. Wood, B. J. Wang, J. Q. and Atrens, A. 2000. Implications of specimen preparation and of surface contamination for the measurement of the grain boundary carbon concentration of steels using x-ray microanalysis in an UHV FESTEM. Surface and Interface Analysis, Vol. 29, Issue. 1, p. 23.

Schamm, S. and Zanchi, G. 2001. Contamination and the quantitative exploitation of EELS low-loss experiments. Ultramicroscopy, Vol. 88, Issue. 3, p. 211.

Andrén, Hans-Olof 2001. Combining TEM and APFIM techniques to study the microstructure of steels and hardmetals. Micron, Vol. 32, Issue. 8, p. 713.

2001. Electron Microscopy and Analysis 2001. p. 205.

Wilson, J.A and Craven, A.J 2003. Improving the analysis of small precipitates in HSLA steels using a plasma cleaner and ELNES. Ultramicroscopy, Vol. 94, Issue. 3-4, p. 197.

Goldstein, Joseph I. Newbury, Dale E. Echlin, Patrick Joy, David C. Lyman, Charles E. Lifshin, Eric Sawyer, Linda and Michael, Joseph R. 2003. Scanning Electron Microscopy and X-ray Microanalysis. p. 591.

Erni, R. Heinrich, H. and Kostorz, G. 2003. Quantitative characterisation of chemical inhomogeneities in –Ag using high-resolution Z-contrast STEM. Ultramicroscopy, Vol. 94, Issue. 2, p. 125.

Cairney, J.M. and Munroe, P.R. 2003. Redeposition effects in transmission electron microscope specimens of FeAl–WC composites prepared using a focused ion beam. Micron, Vol. 34, Issue. 2, p. 97.

Egerton, R.F. Li, P. and Malac, M. 2004. Radiation damage in the TEM and SEM. Micron, Vol. 35, Issue. 6, p. 399.

Larsson, Magnus W. Wallenberg, L. Reine Persson, Ann I. and Samuelson, Lars 2004. Probing of Individual Semiconductor Nanowhiskers by TEM-STM. Microscopy and Microanalysis, Vol. 10, Issue. 1, p. 41.

Reed, S. J. B. 2005. Electron Microprobe Analysis and Scanning Electron Microscopy in Geology.

Weyland, M. Yates, T.J.V. Dunin-Borkowski, R.E. Laffont, L. and Midgley, P.A. 2006. Nanoscale analysis of three-dimensional structures by electron tomography. Scripta Materialia, Vol. 55, Issue. 1, p. 29.

Ko, Dong-Su Park, Young Min Kim, Sung-Dae and Kim, Young-Woon 2007. Effective removal of Ga residue from focused ion beam using a plasma cleaner. Ultramicroscopy, Vol. 107, Issue. 4-5, p. 368.

Erni, Rolf and Browning, Nigel D. 2007. Quantification of the size-dependent energy gap of individual CdSe quantum dots by valence electron energy-loss spectroscopy. Ultramicroscopy, Vol. 107, Issue. 2-3, p. 267.

Wilson, J. A. Craven, A. J. Li, Y. and Baker, T. N. 2007. Dispersion strengthening in vanadium microalloyed steels processed by simulated thin slab casting and direct charging Part 2 – Chemical characterisation of dispersion strengthening precipitates. Materials Science and Technology, Vol. 23, Issue. 5, p. 519.

Weyland, M. and Midgley, P. A. 2007. Nanocharacterisation. p. 184.

Mandal, S. Rice, J. and Elmustafa, A.A. 2008. Experimental and numerical investigation of the plunge stage in friction stir welding. Journal of Materials Processing Technology, Vol. 203, Issue. 1-3, p. 411.

Wang, J J Lockwood, A J Peng, Y Xu, X Bobji, M S and Inkson, B J 2009. The formation of carbon nanostructures byin situTEM mechanical nanoscale fatigue and fracture of carbon thin films. Nanotechnology, Vol. 20, Issue. 30, p. 305703.

Fuchs, P. 2009. Low-pressure plasma cleaning of Au and PtIr noble metal surfaces. Applied Surface Science, Vol. 256, Issue. 5, p. 1382.

Download full list

Article contents

Plasma Cleaning and Its Applications for Electron Microscopy

Abstract

Access options

This article has been cited by the following publications. This list is generated based on data provided by Crossref.

Article contents

Plasma Cleaning and Its Applications for Electron Microscopy

Abstract

Access options

Save article to Kindle

Save article to Dropbox

Save article to Google Drive

Reply to: Submit a response

Your details

You have entered the maximum number of contributors

Conflicting interests