Hostname: page-component-586b7cd67f-t8hqh Total loading time: 0 Render date: 2024-11-28T15:41:39.859Z Has data issue: false hasContentIssue false
  • English
  • Français

Phosphor Imaging Plate Measurement of Electron Scattering in the Environmental Scanning Electron Micrsoscope

Published online by Cambridge University Press:  02 July 2020

S.A. Wight  and
C.J. Zeissler
S.A. Wight
Affiliation:
Surface and Microanalysis Science Division, National Institute of Standards and Technology, Gaithersburg, MD, 20899-8371 ([email protected])
C.J. Zeissler
Affiliation:
Surface and Microanalysis Science Division, National Institute of Standards and Technology, Gaithersburg, MD, 20899-8371 ([email protected])
Get access

Extract

In this work, phosphor imaging plate technology is applied to measure electron scattering directly in the environmental scanning electron microscope (ESEM) specimen chamber. The scattering of electrons from the primary electron beam, under relatively high-pressure conditions (266 Pa) in the ESEM sample chamber, degrades the analytical accuracy of elemental analysis. The degree of this degradation is poorly known. To date, attempts to measure experimentally the spatial distribution of the scattered electrons have been limited to observing secondary effects such as the intensity of x-rays produced from copper targets positioned at various distances from the primary electron beam interaction point. A more accurate distribution of the scattered electron intensity can be obtained from a direct measurement of both the scattered and unscattered electrons over a large area with single electron sensitivity. Improvements to the accuracy of Monte Carlo models of the scattering process will be made possible by the direct measurement data.

Type
Working with ESEM and Other Variable Pressure Systems
Information
Microscopy and Microanalysis , Volume 6 , Issue S2: Proceedings: Microscopy & Microanalysis 2000, Microscopy Society of America 58th Annual Meeting, Microbeam Analysis Society 34th Annual Meeting, Microscopical Society of Canada/Societe de Microscopie de Canada 27th Annual Meeting, Philadelphia, Pennsylvania August 13-17, 2000 , August 2000 , pp. 798 - 799
Copyright
Copyright © Microscopy Society of America

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

References:

1. Certain commercial software, equipment, instruments, or materials are identified in this report to specify adequately the experimental procedure. Such identification does not imply recommendation or endorsement by the National Institute of Standards and Technology, nor does it imply that the materials or equipment identified are necessarily the best available for the purpose.Google Scholar
2.Wight, S.A., Microscopy and Microanalysis Supp 2 4(1998)298.CrossRefGoogle Scholar
3.Joy, D.C., Microscopy and Microanalysis (1996)836.Google Scholar
4.Bache, I.C., Kitching, S., Thiel, B.L., Donald, A.M., Microscopy and Microanalysis Supp 2 3(1997)1211.CrossRefGoogle Scholar
5.Gauvin, R., SCANNING 21,6(1999)388.CrossRefGoogle ScholarPubMed