Crossref Citations
This article has been cited by the following publications. This list is generated based on data provided by Crossref.
Sohrabi, Mohammad Javad
Mirzadeh, Hamed
and
Rafiei, Mohsen
2018.
Solidification behavior and Laves phase dissolution during homogenization heat treatment of Inconel 718 superalloy.
Vacuum,
Vol. 154,
Issue. ,
p.
235.
Martin, Alexander C.
and
Fink, Carolin
2019.
Initial weldability study on Al0.5CrCoCu0.1FeNi high-entropy alloy.
Welding in the World,
Vol. 63,
Issue. 3,
p.
739.
Sohrabi, Mohammad Javad
Mirzadeh, Hamed
and
Rafiei, Mohsen
2019.
Revealing the As-Cast and Homogenized Microstructures of Niobium-Bearing Nickel-Based Superalloy.
International Journal of Metalcasting,
Vol. 13,
Issue. 2,
p.
320.
Martin, Alexander C.
Oliveira, João Pedro
and
Fink, Carolin
2020.
Elemental Effects on Weld Cracking Susceptibility in AlxCoCrCuyFeNi High-Entropy Alloy.
Metallurgical and Materials Transactions A,
Vol. 51,
Issue. 2,
p.
778.
Benrabah, I.-E.
Altinkurt, G.
Fèvre, M.
Dehmas, M.
Denand, B.
Fossard, F.
Mérot, J.-S.
Geandier, G.
Locq, D.
and
Perrut, M.
2020.
Monitoring the kinetics of the γ’ phase in the N18 superalloy using in situ electrical resistivity measurements.
Journal of Alloys and Compounds,
Vol. 825,
Issue. ,
p.
154108.
Gundgire, Tejas
Goel, Sneha
Klement, Uta
and
Joshi, Shrikant
2020.
Response of different electron beam melting produced Alloy 718 microstructures to thermal post-treatments.
Materials Characterization,
Vol. 167,
Issue. ,
p.
110498.
Ogunbiyi, Olugbenga
Jamiru, Tamba
Sadiku, Rotimi
Beneke, Lodewyk
Adesina, Oluwagbenga
and
Obadele, Babatunde Abiodun
2020.
Corrosion and Wear Behaviour of Spark Plasma-Sintered NiCrCoAlTiW-Ta Superalloy.
Journal of Bio- and Tribo-Corrosion,
Vol. 6,
Issue. 1,
Demeneghi, Gabriel
Elliott, Skylar
Rabenberg, Ellen
Girgis, Ayman
Tilson, William
Gray, Annette
and
Jerman, Gregory
2021.
Heat Treatment Effects on Pristine and Cold-Worked Thin-Walled Inconel 625.
Metals,
Vol. 11,
Issue. 11,
p.
1746.
Zhou, Wei
Chen, Xiaohua
Wang, Yanlin
Chen, Kaixuan
Zhu, Yuzhi
Qin, Junwei
Wang, Zidong
and
Zuo, Lingli
2022.
Microstructural Evolution of Wrought-Nickel-Based Superalloy GH4169.
Metals,
Vol. 12,
Issue. 11,
p.
1936.
Lesseur, Julien
Tranchand, Benoit
Mancier, Thibaut
Montauzier, Armand
Larignon, Céline
and
Perusin, Simon
2022.
On the use of X-ray microtomography to control artificial defect geometries produced by metal additive manufacturing.
Nondestructive Testing and Evaluation,
Vol. 37,
Issue. 5,
p.
611.
Mata-Rodríguez, Marcos Ariel
García-Rentería, Marco Arturo
Ambríz-Rojas, Ricardo Rafael
Cabral-Miramontes, José Ángel
López-Morelos, Victor Hugo
Ramírez-López, Maria del Carmen
and
Curiel-López, Francisco Fernando
2022.
Microstructural Evolution of Inconel 718 during Aging and Its Correlation with Electric Conductivity Measurements.
Materials Performance and Characterization,
Vol. 11,
Issue. 1,
p.
267.
Paradise, Paul
Patil, Dhiraj
Van Handel, Nicole
Temes, Samuel
Saxena, Anushree
Bruce, Daniel
Suder, Austin
Clonts, Shawn
Shinde, Mandar
Noe, Cameron
Godfrey, Donald
Hota, Rakesh
and
Bhate, Dhruv
2022.
Improving Productivity in the Laser Powder Bed Fusion of Inconel 718 by Increasing Layer Thickness: Effects on Mechanical Behavior.
Journal of Materials Engineering and Performance,
Vol. 31,
Issue. 8,
p.
6205.
Doğu, Merve Nur
Davut, Kemal
Obeidi, Muhannad Ahmed
Yalçın, Mustafa Alp
Gu, Hengfeng
Low, Thaddeus Song En
Ginn, Jon
and
Brabazon, Dermot
2022.
Recrystallization and grain growth kinetics of IN718 manufactured by laser powder bed fusion.
Journal of Materials Research and Technology,
Vol. 19,
Issue. ,
p.
4242.
Iams, A.D.
Lienert, T.J.
Otazu, D.A.
and
Ramoni, M.
2023.
Effects of deposition sequence on microstructural evolution in additively manufactured Cu-Cr-Nb alloy / superalloy bimetallic structures.
Additive Manufacturing Letters,
Vol. 6,
Issue. ,
p.
100151.
Shen, Jiajia
Martin, Alexander C.
Schell, Norbert
Fink, Carolin
and
Oliveira, J.P.
2023.
Microstructures in arc-welded Al10Co25Cr8Fe15Ni36Ti6 and Al10.87Co21.74Cr21.74Cu2.17Fe21.74Ni21.74 multi-principal element alloys: Comparison between experimental data and thermodynamic predictions.
Materials Today Communications,
Vol. 34,
Issue. ,
p.
104784.
Macoretta, G.
Bertini, L.
Monelli, B.D.
and
Berto, F.
2023.
Productivity-oriented SLM process parameters effect on the fatigue strength of Inconel 718.
International Journal of Fatigue,
Vol. 168,
Issue. ,
p.
107384.
Alomairi, Bassam Salman
Driss, Zied
and
Abood, Adnan Naama
2024.
Microstructural evaluation of welded joints of ASTM Mar-M247 superalloy using ERNiCrMo-3 filler alloy.
Matéria (Rio de Janeiro),
Vol. 29,
Issue. 1,
Fang, Ning
Zhou, Ziyao
and
Britton, Ben
2024.
The Performance of Different Etchants on the Carbides of Ni600 and Ni625.
Metals,
Vol. 14,
Issue. 1,
p.
91.
Macoretta, G.
Monelli, B.D.
Arcioni, M.
and
Grilli, M.
2024.
Effects of deep hole drilling processes on the fatigue strength of GTD-111 DS.
International Journal of Fatigue,
Vol. 188,
Issue. ,
p.
108525.
Bon, Douglas
Cavalcante, Thiago
Thiesen, Anselmo
Santos, Henrique
Gutjahr, Jhonattan
Cintho, Osvaldo
Coelho, Reginaldo
de Oliveira, Marcelo Falcão
Ribamar, Giovani Gonçalves
and
Avila, Julian Arnaldo
2024.
Effect of stress relief and solubilization heat treatments on laser additive manufactured Inconel 625: microstructure and properties.
The International Journal of Advanced Manufacturing Technology,
Vol. 130,
Issue. 9-10,
p.
4919.