Hostname: page-component-586b7cd67f-g8jcs Total loading time: 0 Render date: 2024-12-01T04:01:51.754Z Has data issue: false hasContentIssue false
  • English
  • Français

Electron Probe Evaluation of Heterogeneity in the Certification of NIST Standard Reference Materials for Microanalysis

Published online by Cambridge University Press:  02 July 2020

R. B. Marinenko  and
S. Leigh
R. B. Marinenko
Affiliation:
Surface and Microanalysis Science Division and Statistical Engineering Division, National Institute of Standards and Technology (NIST), Gaithersburg, MD, 20899
S. Leigh
Affiliation:
Statistical Engineering Division, National Institute of Standards and Technology (NIST), Gaithersburg, MD, 20899
Get access

Extract

The certification process for a microanalysis standard can be quite lengthy. In addition to certifying the reference material for composition, the extent of heterogeneity between specimens and within specimens must be determined. NIST (or formerly, NBS) 260 Special Publications have been used in the past to describe procedures used for individual SRM certifications. Some of these publications describe in detail how the extent of microheterogeneity (or, microhomogeneity) as well as the specimen to specimen heterogeneity can be determined. The intent here is to describe a general statistical approach used at NIST to determine and report the extent of heterogeneity. This approach can be readily used by other laboratories either for certification or for evaluation of standards.

When evaluating a material for use as a standard, there are several physical characteristics which must be satisfied. The material must be robust under the electron beam at the voltages and currents to which it will be subjected in its proposed use. When mounted and polished, it should be stable on exposure to the atmosphere. However, if the material will not be mounted and polished in use, it should be in the same physical form as the final certified standard material.

Type
Quantitative Microanalysis
Information
Microscopy and Microanalysis , Volume 4 , Issue S2: Proceedings: Microscopy & Microanalysis '98, Microscopy Society of America 56th Annual Meeting, Microbeam Analysis Society 32nd Annual Meeting, Atlanta, Georgia July 12-16, 1998 , July 1998 , pp. 242 - 243
Copyright
Copyright © Microscopy Society of America

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

1.Heinrich, K. F. J. et al., Preparation and Evaluation of SRM's 481 and 482 Gold-Silver and Gold- Copper Alloys for Microanalysis, NBS Special Publication 260-28(1971)89 pp.Google Scholar
2.Marinenko, R. B. et al., Micro-homogeneity Studies of NBS Standard Reference Materials, NBS Research Materials, and other Related Samples, NBS Special Publication 260-65(1979)73 pp.Google Scholar
3.Marinenko, R. B. et al., Preparation and Characterization of an Iron-Chromium-Nickel Alloy for Microanalysis: SRM 479a, NBS Special Publication 260-70(198l)25pp.Google Scholar
4.Marinenko, R. B., Preparation and Characterization of K-411 and K-412 Mineral Glasses for Microanalysis, NBS Special Publication 260-74(1982)16 pp.Google Scholar
5.Goldstein, J. I. et al., Scanning Electron Microscopy and X-ray Microanalysis, New York Plenum (1992)89.CrossRefGoogle Scholar
6.Neter, J. et al., Applied Linear Statistical Models, Chicago Irwin (1996)1147.Google Scholar