Hostname: page-component-586b7cd67f-rcrh6 Total loading time: 0 Render date: 2024-11-24T06:59:59.206Z Has data issue: false hasContentIssue false
  • English
  • Français

Effects of Preheating and Cooling Durations on Roll-to-Roll Hot Embossing

Published online by Cambridge University Press:  14 October 2014

Seyoung Kim ,
Youngsu Son ,
Heechang Park ,
Byungin Kim  and
Dongwon Yun
Seyoung Kim*
Affiliation:
Department of Robotics and Mechatronics, Korea Institute of Machinery & Materials (KIMM), 156 Gajeongbuk-Ro, Yuseong-Gu, Daejeon 305-343, South Korea
Youngsu Son
Affiliation:
Department of Robotics and Mechatronics, Korea Institute of Machinery & Materials (KIMM), 156 Gajeongbuk-Ro, Yuseong-Gu, Daejeon 305-343, South Korea
Heechang Park
Affiliation:
Department of Robotics and Mechatronics, Korea Institute of Machinery & Materials (KIMM), 156 Gajeongbuk-Ro, Yuseong-Gu, Daejeon 305-343, South Korea
Byungin Kim
Affiliation:
Department of Robotics and Mechatronics, Korea Institute of Machinery & Materials (KIMM), 156 Gajeongbuk-Ro, Yuseong-Gu, Daejeon 305-343, South Korea
Dongwon Yun
Affiliation:
Department of Robotics and Mechatronics, Korea Institute of Machinery & Materials (KIMM), 156 Gajeongbuk-Ro, Yuseong-Gu, Daejeon 305-343, South Korea
*
*Corresponding author. [email protected]
Get access

Abstract

In this study, we examined the sensitivity of embossed pattern depth to preheat supply and cooling and investigated how the pattern type and density affect the embossed depth. The main factors that affect embossed pattern qualities of roll-to-roll hot embossing, such as roller temperature, roller speed, and applied force, were determined using the response surface methodology. Eight conditions were then added to determine the time-dependent effects of heat transfer with custom-designed preheating and cooling systems. An extended preheat time for the polymethylmethacrylate substrate contributed to the significant change in the embossed depth, whereas the substrate-cooling did not exhibit a clear increasing or decreasing trend. Larger embossed depths were achieved in the horizontal patterns with lower density than in the vertical patterns, and the lower pattern densities showed greater embossed depths in most embossing conditions. We expect that this result will help to understand the effects of the pre- and posttreatment of roll-to-roll hot embossing by employing time duration factors of heat transfer, depending on the mold pattern type and density.

Keywords

roll-to-roll hot embossingpreheatingcoolingpattern typepattern densitypattern depth ratio
Type
Materials Applications
Information
Microscopy and Microanalysis , Volume 21 , Issue 1 , February 2015 , pp. 164 - 171
Copyright
© Microscopy Society of America 2014 

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

Ahn, S.H. & Guo, L.J. (2008). High-speed roll-to-roll nanoimprint lithography on flexible plastic substrates. Adv Mater 20(11), 2044–2049.CrossRefGoogle Scholar
Chang, C., Yang, S. & Sheh, J. (2006). A roller embossing process for rapid fabrication of microlens arrays on glass substrates. Microsyst Technol 12(8), 754–759.Google Scholar
Cho, Y., Kwon, S., Seo, J.-W., Kim, J.-G., Cho, J.-W., Park, J.-W., Kim, H. & Lee, S. (2009). Development of large area nano imprint technology by step and repeat process and pattern stitching technique. Microelectron Eng 86(12), 2417–2422.Google Scholar
Davies, J. & Simpson, P. (1979). Induction Heating Handbook. New York, NY: McGraw-Hill.Google Scholar
Erickson, C.J. (1995). Handbook of Electrical Heating for Industry. Piscataway, NJ: IEEE Press.Google Scholar
Fagan, M.D., Kim, B.H. & Yao, D. (2009). A novel process for continuous thermal embossing of large-area nanopatterns onto polymer films. Adv Polym Tech 28(4), 246–256.Google Scholar
He, Y., Fu, J.-Z. & Chen, Z.-C. (2007). Research on optimization of the hot embossing process. J Micromech Microeng 17(12), 2420–2425.Google Scholar
Ishizawa, N., Idei, K., Kimura, T., Noda, D. & Hattori, T. (2008). Resin micromachining by roller hot embossing. Microsyst Technol 14(9–11), 1381–1388.CrossRefGoogle Scholar
Liu, S.-J., Huang, C.-C. & Liao, C.-T. (2012). Continuous infrared-assisted double-sided roll-to-roll embossing of flexible polymer substrates. Polym Eng Sci 52(7), 1395–1401.Google Scholar
Lou, H., Li, W., Li, C. & Wang, X. (2013). Systematic investigation on parameters of solution blown micro/nanofibers using response surface methodology based on box-Behnken design. J Appl Polym Sci 130(2), 1383–1391.Google Scholar
Metwally, K., Queste, S., Robert, L., Salut, R. & Khan-Malek, C. (2011). Hot roll embossing in thermoplastic foils using dry-etched silicon stamp and multiple passes. Microelectron Eng 88(8), 2679–2682.Google Scholar
Myers, R.H., Montgomery, D.C. & Anderson-Cook, C.M. (2009). Response Surface Methodology: Process and Product Optimization Using Designed Experiments. Hoboken, NJ: Wiley.Google Scholar
Ng, S.H. & Wang, Z.F. ( 2008). Hot roller embossing for the creation of microfluidic devices. In DTIP of MEMS and MOEMS—Symposium on Design, Test, Integration and Packaging of MEMS/MOEMS, pp. 262–266. 9–11 April 2008, Nice, France. Grenoble, France: EDA Publishing.Google Scholar
Nouraei, S. & Roy, S. (2009). Design of experiments in electrochemical microfabrication. Electrochimic Acta 54(9), 2444–2449.Google Scholar
Omar, F., Kolew, A., Brousseau, E.B. & Hirshy, H. (2013). Simulation and experimental study of the effects of process factors on the uniformity of the residual layer thickness in hot embossing. J Micro Nano-Manuf 1(2), 021002.Google Scholar
Rowland, H.D., King, W.P., Sun, A.C. & Schunk, P.R. (2005 a). Simulations of nonuniform embossing: The effect of asymmetric neighbor cavities on polymer flow during nanoimprint lithography. J Vac Sci Technol B 23(6), 2958–2962.Google Scholar
Rowland, H.D., Sun, A.C., Schunk, P.R. & King, W.P. (2005 b). Impact of polymer film thickness and cavity size on polymer flow during embossing: Toward process design rules for nanoimprint lithography. J Micromech Microeng 15(12), 2414–2425.Google Scholar
Schift, H., Halbeisen, M., Schütz, U., Delahoche, B., Vogelsang, K. & Gobrecht, J. (2006). Surface structuring of textile fibers using roll embossing. Microelectron Eng 83(4–9 Special Issue), 855–858.Google Scholar
Schulz, H., Wissen, M. & Scheer, H.-C. (2003). Local mass transport and its effect on global pattern replication during hot embossing. Microelectron Eng 67–68(1), 657–663.Google Scholar
Shan, X., Jin, L., Soh, Y.C. & Lu, C.W. (2010). A polymer-metal hybrid flexible mould and application for large area hot roller embossing. Microsyst Technol 16(8–9), 1393–1398.Google Scholar
Shan, X., Soh, Y.C., Shi, C.W.P., Tay, C.K. & Lu, C.W. (2008). Large area roller embossing of multilayered ceramic green composites. In DTIP of MEMS and MOEMS—Symposium on Design, Test, Integration and Packaging of MEMS/MOEMS, pp. 314–319. 9–11 April 2008, Nice, France. Grenoble, France: EDA Publishing.Google Scholar
Velten, T., Schuck, H., Haberer, W. & Bauerfeld, F. (2010). Investigations on reel-to-reel hot embossing. Int J Adv Manuf Technol 47(1–4), 73–80.Google Scholar
Yeo, L.P., Ng, S.H., Wang, Z., Wang, Z. & de Rooij, N.F. (2009). Micro-fabrication of polymeric devices using hot roller embossing. Microelectron Eng 86(4–6), 933–936.Google Scholar
Yeo, L.P., Ng, S.H., Wang, Z.F., Xia, H.M., Wang, Z.P., Thang, V.S., Zhong, Z.W. & Rooij, N.F.D. (2010). Investigation of hot roller embossing for microfluidic devices. J Micromech Microeng 20(1), 015017.Google Scholar
Yun, D., Son, Y., Kyung, J., Park, H., Park, C., Lee, S. & Kim, B. (2012). Development of roll-to-roll hot embossing system with induction heater for micro fabrication. Rev Sci Instrum 83(1), 015108.Google Scholar