Crossref Citations
This article has been cited by the following publications. This list is generated based on data provided by
Crossref.
Toth, M
Daniels, D R
Thiel, B L
and
Donald, A M
2002.
Quantification of electron-ion recombination in an electron-beam-irradiated gas capacitor.
Journal of Physics D: Applied Physics,
Vol. 35,
Issue. 14,
p.
1796.
Toth, M.
Thiel, B.L.
and
Donald, A.M.
2003.
Interpretation of secondary electron images obtained using a low vacuum SEM.
Ultramicroscopy,
Vol. 94,
Issue. 2,
p.
71.
Thiel, Bradley L
2004.
Master curves for gas amplification in low vacuum and environmental scanning electron microscopy.
Ultramicroscopy,
Vol. 99,
Issue. 1,
p.
35.
Toth, Milos
Lobo, Charlene J.
Knowles, W. Ralph
Phillips, Matthew R.
Postek, Michael T.
and
Vladár, András E.
2007.
Nanostructure Fabrication by Ultra-High-Resolution Environmental Scanning Electron Microscopy.
Nano Letters,
Vol. 7,
Issue. 2,
p.
525.
Toth, Milos
Uncovsky, Marek
Ralph Knowles, W.
and
Baker, Francis S.
2007.
Secondary electron imaging at gas pressures in excess of 1kPa.
Applied Physics Letters,
Vol. 91,
Issue. 5,
DANILATOS, G.D.
2009.
Optimum beam transfer in the environmental scanning electron microscope.
Journal of Microscopy,
Vol. 234,
Issue. 1,
p.
26.
DANILATOS, G.
RATTENBERGER, J.
and
DRACOPOULOS, V.
2011.
Beam transfer characteristics of a commercial environmental SEM and a low vacuum SEM.
Journal of Microscopy,
Vol. 242,
Issue. 2,
p.
166.
Arnoult, Claire
Di Martino, Jean
Khouchaf, Lahcen
Toniazzo, Valérie
and
Ruch, David
2011.
Pressure and scattering regime influence on the EDS profile resolution at a composite interface in environmental SEM.
Micron,
Vol. 42,
Issue. 8,
p.
877.
Arnoult, Claire
Di Martino, Jean
and
Ruch, David
2012.
Prediction and limitation of polymer degradation in Environmental SEM.
Ultramicroscopy,
Vol. 122,
Issue. ,
p.
32.
Danilatos, Gerasimos D.
2012.
Velocity and ejector-jet assisted differential pumping: Novel design stages for environmental SEM.
Micron,
Vol. 43,
Issue. 5,
p.
600.
Pantazis, Sarantis
and
Valougeorgis, Dimitris
2013.
Rarefied gas flow through a cylindrical tube due to a small pressure difference.
European Journal of Mechanics - B/Fluids,
Vol. 38,
Issue. ,
p.
114.
Danilatos, Gerasimos D.
2013.
Implications of the figure of merit in environmental SEM.
Micron,
Vol. 44,
Issue. ,
p.
143.
Toth, Milos
2014.
Advances in gas-mediated electron beam-induced etching and related material processing techniques.
Applied Physics A,
Vol. 117,
Issue. 4,
p.
1623.
FITZEK, H.
SCHROETTNER, H.
WAGNER, J.
HOFER, F.
and
RATTENBERGER, J.
2016.
High‐quality imaging in environmental scanning electron microscopy – optimizing the pressure limiting system and the secondary electron detection of a commercially available ESEM.
Journal of Microscopy,
Vol. 262,
Issue. 1,
p.
85.
Zhang, Zhouyang
Zhou, Yangbo
Zhu, Xinli
Fei, Linfeng
Huang, Haitao
and
Wang, Yu
2020.
Applications of ESEM on Materials Science: Recent Updates and a Look Forward.
Small Methods,
Vol. 4,
Issue. 2,
Maxa, Jiří
Neděla, Vilém
Šabacká, Pavla
and
Binar, Tomáš
2024.
Mathematical Physics Analysis of Nozzle Shaping at the Gas Outlet from the Aperture to the Differentially Pumped Chamber in Environmental Scanning Electron Microscopy (ESEM).
Sensors,
Vol. 24,
Issue. 10,
p.
3243.
Šabacká, Pavla
Maxa, Jiří
Švecová, Jana
Talár, Jaroslav
Binar, Tomáš
Bayer, Robert
Bača, Petr
Dostalová, Petra
and
Švarc, Jiří
2024.
Mathematical-Physics Analyses of the Nozzle Shaping at the Aperture Gas Outlet into Free Space under ESEM Pressure Conditions.
Sensors,
Vol. 24,
Issue. 11,
p.
3436.