Hostname: page-component-586b7cd67f-2brh9 Total loading time: 0 Render date: 2024-11-28T09:11:53.588Z Has data issue: false hasContentIssue false
  • English
  • Français

Atom Probe Tomographic Characterization of Nanoscale Cu-Rich Precipitates in 17-4 Precipitate Hardened Stainless Steel Tempered at Different Temperatures

Published online by Cambridge University Press:  16 March 2017

Zemin Wang ,
Xulei Fang ,
Hui Li  and
Wenqing Liu
Zemin Wang
Affiliation:
Key Laboratory for Microstructures, Shanghai University, Shanghai 200444, P. R. China School of Materials Science and Engineering, Shanghai Institute of Technology, Shanghai 201418, P. R. China
Xulei Fang
Affiliation:
Key Laboratory for Microstructures, Shanghai University, Shanghai 200444, P. R. China
Hui Li
Affiliation:
Key Laboratory for Microstructures, Shanghai University, Shanghai 200444, P. R. China
Wenqing Liu*
Affiliation:
Key Laboratory for Microstructures, Shanghai University, Shanghai 200444, P. R. China
*
*Corresponding author.[email protected]
Get access

Abstract

The formation of copper-rich precipitates of 17-4 precipitate hardened stainless steel has been investigated, after tempering at 350–570°C for 4 h, by atom probe tomography (APT). The results reveal that the clusters, enriched only with Cu, were observed after tempering at 420°C. Segregation of Ni, Mn to the Cu-rich clusters took place at 450°C, contributing to the increased hardening. After tempering at 510°C, Ni and Mn were rejected from Cu-rich precipitates and accumulated at the precipitate/matrix interfaces. Al and Si were present and uniformly distributed in the precipitates that were <1.5 nm in radius, but Ni, Mn, Al, and Si were enriched at the interfaces of larger precipitates/matrix. The proxigram profiles of the Cu-rich precipitates formed at 570°C indicated that Ni, Mn, Al, and Si segregated to the precipitate/matrix interfaces to form a Ni(Fe, Mn, Si, Al) shell, which significantly reduced the interfacial energy as the precipitates grew into an elongated shape. In addition, the number density of Cu-rich precipitates was increased with the temperature elevated from 350 up to 450°C and subsequently decreased at higher temperatures. Also, the composition of the matrix and the precipitates were measured and found to vary with temperature.

Keywords

17-4 PH stainless steelatom probe tomographytemperingCu-rich precipitatehardening
Type
Materials Science (Metals)
Information
Microscopy and Microanalysis , Volume 23 , Special Issue 2: Atom Probe Tomography & Microscopy 2016 , April 2017 , pp. 340 - 349
Copyright
© Microscopy Society of America 2017 

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

Danoix, F. & Auger, P. (2000). Atom probe studies of the Fe–Cr system and stainless steels aged at intermediate temperature: A review. Mater Charact 44(1), 177–201.Google Scholar
Hsiao, C.N., Chiou, C.S. & Yong, J.R. (2002). Aging reactions in a 17-4 PH stainless steel. Mater Chem Phys 74(2), 132–142.Google Scholar
Isheim, D., Gagliano, M.S., Fine, M.E. & Seidman, D.N. (2006). Interfacial segregation at Cu-rich precipitates in a high-strength low-carbon steel studied on a sub-nanometer scale. Acta Mater 54(3), 841–849.Google Scholar
Jiao, Z.B., Luan, J.H., Miller, M.K. & Liu, C.T. (2015). Precipitation mechanism and mechanical properties of an ultra-high strength steel hardened by nanoscale NiAl and Cu particles. Acta Mater 97(4), 58–67.Google Scholar
Kolli, R.P., Mao, Z. & Seidman, D.N. (2007). Identification of a Ni0.5(Al0.5-xMnx) B2phase at the heterophase interfaces of Cu-rich precipitates in an α-Fe matrix. Appl Phys Lett 91, 2073–2088.Google Scholar
Kolli, R.P. & Seidman, D.N. (2008). The temporal evolution of the decomposition of a concentrated multicomponent Fe-Cu-based steel. Acta Mater 56(9), 2073–2088.Google Scholar
Kolli, R.P & Seidman, D.N. (2007). Comparison of compositional and morphological atom-probe tomography analyses for a multicomponent Fe-Cu steel. Microsc Microanal 13, 272–284.Google Scholar
Miller, M.K. (2000). Atom Probe Tomography: Analysis at the Atomic Level. New York: Kluwer Academic/Plenum Publishers.Google Scholar
Murayama, M., Katayama, Y. & Hono, K. (1999). Microstructural evolution in a 17-4 PH stainless steel after aging at 400°C. Metall Mater Trans A 30(2), 345–353.Google Scholar
Maruyama, N., Sugiyama, M., Hara, T. & Tamehiro, H. (1999). Precipitates and phase transformation of copper particles in low alloy ferritic and martensitic steels. Mater Trans Jim A 40, 268–277.Google Scholar
Morley, A., Sha, G., Hirosawa, S., Cerezo, A. & Smith, G.D.W. (2009). Determining the composition of small features in atom probe: BCC Cu-rich precipitates in an Fe-rich matrix. Ultramicroscopy 109, 535–540.Google Scholar
Mirzadeh, H. & Najafizadeh, A. (2009). Aging kinetics of 17-4 PH stainless steel. Mater Chem Phys 116(1), 119–124.Google Scholar
Miller, M.K., Sokolov, M.A., Nanstad, R.K & Russell, K.F. (2006). APT characterization of high nickle RPV steels. J Nucl Mater 351(1–3), 187–196.Google Scholar
Monzen, R., Jenkins, M. & Sutton, A.P. (2000). The BCC-to-9R martensitic transformation of Cu precipitates and the relation process of the elastic strains in an Fe-Cu alloy. Philos Mag A 80, 711–723.CrossRefGoogle Scholar
Othen, P.J., Jenkins, M.L., Smith, G.D.W. & Phythian, W.J. (1991). Transmission electron microscope investigations of the structure of copper precipitates in thermally-aged Fe-Cu and Fe-Cu-Ni. Philos Mag Lett A 64(6), 383–391.Google Scholar
Osamura, K., Okuda, H., Asoano, K., Furusaka, M., Kishida, K., Kurosawa, F. & Uemori, R. (1994). SANS study of phase decomposition in Fe-Cu alloy with Ni and Mn addition. ISIJ Int 34(4), 346–354.Google Scholar
Rack, H.J. & Kalish, D. (1974). The strength, fracture toughness, and low cycle fatigue behavior of 17-4PH stainless steel. Metall Trans 5(7), 1595–1605.Google Scholar
Stephenson, L.T., Moody, M.P., Liddicoat, P.V. & Ringer, S.P. (2007). New techniques for the analysis of fine-scaled clustering phenomena within atom probe tomography (APT) data. Microsc Microanal 13(6), 448–463.Google Scholar
Styman, P.D., Hyde, J.M., Wilford, K., Parfitt, D., Riddle, N & Smith, G.D.W. (2015). Characterisation of interfacial segregation to Cu-enriched precipitates in two thermally aged reactor pressure vessel steel welds. Ultramicroscopy 159, 292–298.CrossRefGoogle ScholarPubMed
Takeuchi, A. & Inoue, A. (2005). Classification of bulk metallic glasses by atomic size difference, heat of mixing and period of constituent elements and its application to characterization of the main alloying element. Mater Trans 46(12), 2817–2829.Google Scholar
Viswanathan, U.K., Banerjee, S. & Krishnan, R. (1988). Effects of aging on the microstructure of 17-4 PH stainless steel. Mater Sci Eng A 104(6), 181–189.Google Scholar
Viswanathan, U.K., Nayar, P.K.K. & Krishnan, R. (1989). Kinetics of precipitation in 17-4PH stainless steel. Mater Sci Technol 5(4), 346–349.Google Scholar
Wang, J. (2007). Study on the properties of a 17-4 PH stainless steel using in the nuclear reactor. PhD Thesis, Sichuan University, Chengdu, China.Google Scholar
Wang, J., Zou, H., Wu, X.Y, Li, C. Qiu, S.Y. & Shen, B.L. (2005). The effect of long-term isothermal aging on dynamic fracture toughness of type 17–4 PH SS at 350°C. Mater Trans. 46(4), 846–851.Google Scholar
Wang, J., Zou, H., Li, C., Peng, Y., Qiu, S. & Shen, B.L. (2006). The microstructure evolution of type 17-4 PH stainless steel during long-term aging at 350°C. Nucl Eng Des 236(24), 2531–2536.Google Scholar
Wang, J., Zou, H., Li, C., Zuo, R.L., Qiu, S.Y. & Shen, B.L. (2006). Relationship of microstructure transformation and hardening behavior of type 17-4 PH stainless steel. J Univ Sci Technol Beijing Miner Metall Mater 13(3), 235–239.Google Scholar
Wang, X., Sha, G., Shen, Q. & Liu, W. (2015). Age-hardening effect and formation of nanoscale composite precipitates in a NiAlMnCu-containing steel. Mater Sci Eng A 627, 340–347.Google Scholar
Zhou, B.X., Wang, J.A., Liu, Q.D., Liu, W.Q., Wang, W., Lin, M.D., Xun, G. & Chu, D.F. (2011). Effects of Nickel alloying element on the precipitation of Cu-rich clusters in RPV model steel. Mater China 30, 1–6.Google Scholar