Hostname: page-component-586b7cd67f-dsjbd Total loading time: 0 Render date: 2024-11-28T05:11:51.370Z Has data issue: false hasContentIssue false
  • English
  • Français

Application of Electron Backscatter Diffraction Techniques to Quenched and Partitioned Steels

Published online by Cambridge University Press:  31 January 2011

Grant Thomas ,
John Speer ,
David Matlock  and
Joseph Michael
Grant Thomas*
Affiliation:
Department of Metallurgical and Materials Engineering, Colorado School of Mines, Advanced Steel Products and Processing Research Center, Hill Hall, Golden, CO 80401, USA
John Speer
Affiliation:
Department of Metallurgical and Materials Engineering, Colorado School of Mines, Advanced Steel Products and Processing Research Center, Hill Hall, Golden, CO 80401, USA
David Matlock
Affiliation:
Department of Metallurgical and Materials Engineering, Colorado School of Mines, Advanced Steel Products and Processing Research Center, Hill Hall, Golden, CO 80401, USA
Joseph Michael
Affiliation:
Materials Characterization Department, Sandia National Laboratories, P.O. Box 5800 MS 0886, Albuquerque, NM 87185, USA
*
Corresponding author. E-mail: [email protected]
Get access

Abstract

Electron backscatter diffraction (EBSD) techniques were used to characterize “hot-rolled” quenched and partitioned microstructures produced via Gleeble thermal simulations representing a hot-strip cooling practice for steel. In particular, EBSD was utilized to positively identify the morphology and location of retained austenite, to qualitatively distinguish martensite from ferrite, and in an attempt to identify transition carbides. Large pools of retained austenite and some thin films were accurately indexed; however, there was some disparity between austenite volume fractions measured by EBSD and those measured by X-ray diffraction. Due to similarities between the crystal structures of martensite and ferrite (body centered tetragonal versus body centered cubic, respectively), martensite could not be distinguished from ferrite by indexing of diffraction patterns; however, martensite could qualitatively be distinguished from ferrite by regions of low image quality based on the very high dislocation density of martensite.

Keywords

EBSDQ&P steelimage qualitymartensiteaustenitecarbidephase identification
Type
Electron Backscatter Diffraction Special Section
Information
Microscopy and Microanalysis , Volume 17 , Issue 3 , June 2011 , pp. 368 - 373
Copyright
Copyright © Microscopy Society of America 2011

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

Clarke, A. (2006). Carbon partitioning into austenite from martensite in a silicon-containing high strength sheet steel. PhD Thesis, Metallurgical and Materials Engineering. Golden, CO: Colorado School of Mines.Google Scholar
De Moor, E., Speer, J.G., Matlock, D.K., Fojer, C. & Penning, J. (2009). Effect of Si, Al and Mo alloying on tensile properties obtained by quenching and partitioning. In MS&T 2009, pp. 1554–1563. Westerville, OH: MS&T Partner Societies.Google Scholar
Field, D.P. (1997). Recent advances in the application of orientation imaging. Ultramicroscopy 67(1-4), 1–9.Google Scholar
Humphreys, F.J. (2001). Grain and subgrain characterisation by electron backscatter diffraction. J Mater Sci 36(16), 3833–3854.CrossRefGoogle Scholar
Jacques, P.J., Allain, S., Bouaziz, O., De, A., Gourgues, A.F., Hance, B.M., Houbaert, Y., Huang, J., Iza-Mendia, A., Kruger, S.E., Radu, M., Samek, L., Speer, J., Zhao, L. & Van Der Zwaag, S. (2009). On measurement of retained austenite in multiphase TRIP steels results of blind round robin test involving six different techniques. Mater Sci Technol 25, 567–574.Google Scholar
Krauss, G. (2005). Steels: Processing, Structure, and Performance. Materials Park, OH: ASM International.Google Scholar
MacKenzie, D.S. & Totten, G.E. (2005). Analytical Characterization of Aluminum, Steel, and Superalloys. Boca Raton, FL: CRC Taylor and Francis.Google Scholar
Mateescu, N., Ferry, M., Xu, W. & Cairney, J.M. (2007). Some factors affecting EBSD pattern quality of Ga+ ion-milled face centred cubic metal surfaces. Mater Chem Phys 106(1), 142–148.Google Scholar
Nowell, M.M. & Wright, S.I. (2005). Orientation effects on indexing of electron backscatter diffraction patterns. Ultramicroscopy 103(1), 41–58.Google Scholar
SAE. (1980). Retained Austenite and Its Measurement by X-Ray Diffraction, p. 12. Warrendale, PA: Society of Automotive Engineers.Google Scholar
Santofimia, M.J., Zhao, L., Petrov, R. & Sietsma, J. (2008). Characterization of the microstructure obtained by the quenching and partitioning process in a low-carbon steel. Mater Charact 59(12), 1758–1764.Google Scholar
Santofimia, M.J., Zhao, L. & Sietsma, J. (2009). Microstructural evolution of a low-carbon steel during application of quenching and partitioning heat treatments after partial austenitization. Metall Mater Trans A 40(1), 46–57.Google Scholar
Speer, J., Matlock, D.K., De Cooman, B.C. & Schroth, J.G. (2003a). Carbon partitioning into austenite after martensite transformation. Acta Mater 51(9), 2611–2622.CrossRefGoogle Scholar
Speer, J.G., Streicher, A.M., Matlock, D.K., Rizzo, F. & Krauss, G. (2003b). Quenching and partitioning: A fundamentally new process to create high strength TRIP sheet microstructures. In Austenite Formation and Decomposition, Damm, E.B. & Merwin, M.J. (Eds.), pp. 505–522. Warrendale, PA: The Minerals, Metals and Materials Society.Google Scholar
Streicher, A.M., Speer, J.G., Matlock, D.K. & De Cooman, B.C. (2004). Quenching and partitioning response of a Si-added TRIP sheet steel. In Proceedings of the International Conference on Advanced High Strength Sheet Steels for Automotive Applications, pp. 51–62. Warrendale, PA: Association for Iron and Steel Technology.Google Scholar
Thomas, G. (2009). Simulation of hot-rolled advanced high strength sheet steel production using a gleeble system. MS Thesis, Metallurgical and Materials Engineering. Golden, CO: Colorado School of Mines.Google Scholar
Thomas, G.A., Speer, J.G. & Matlock, D.K. (2008). Considerations in the application of the “quenching and partitioning” concept to hot-rolled AHSS production. In International Conference on New Developments in Advanced High-Strength Sheet Steels, pp. 227–236. Warrendale, PA: Association for Iron and Steel Technology.Google Scholar